Metra 99-5722 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-5722 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
I N S TA L L AT I O N I N S T R U C T I O N S
99-5722
The World’s best kits.® MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 10/27/20 INST99-5722
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted silver
• Touchscreen display for climate and personalization features
KIT COMPONENTS
• A) Radio trim panel with touchscreen display • B) A/C vent trim panels • C) ISO DDIN brackets • D) ISO DDIN trim plate • E) ISO DIN brackets
• F) ISO DIN trim plate • G) Pocket • H) (10) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
–DIN radio provision with pocket ........................5
–ISO DIN radio provision with pocket ..................6
–ISO DDIN radio provision .....................................7
Axxess Interface Installation ............................ 8-17
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface
and harness included
Antenna Adapter: Included with kit
A B C
G
D E F
Ford Taurus* 2010-2012
H
* Only for models with a key start
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
2386.257.1187
|
MetraOnline.com
DASH DISASSEMBLY
1. Unclip and remove the (2) trim panels
on the left and right side of the center
console. (Figure A)
2. Unclip and remove the trim panel to the
right of the passenger a/c vent.
(Figure B)
3. Unclip and remove the knee bolster
panel below the steering column.
(Figure B)
4. Remove the (1) 9/32” screw from the
trim panel to the left of the steering
column which has the interior light
switch in it.
5. Unclip and remove the trim panel
between the steering column and the
key cylinder, and then remove the (1)
9/32” screw exposed. (Figure C)
6. Unclip and remove the gauge cluster
trim panel. (Figure D)
7. Unclip and remove the trim-panel/
speaker-grill above the radio/climate
control panel. (Figure D)
8. Remove the (4) 9/32” screws securing
the cup holder trim panel, and then
unclip and remove. (Figure E)
Continued on the next page
(Figure C)
(Figure D)
(Figure E)
(Figure B)
(Figure A)
3
REV. 10/27/2020 INST99-5722
DASH DISASSEMBLY (CONT.)
(Figure I)
(Figure H)
9. Remove the (4) 9/32” screws securing
the shifter trim panel, and then slide it
backwards. (Figure F)
Note:
There is no need to remove this
panel completely.
10. Remove the (4) 9/32” screws securing
the ashtray assembly, and then unclip
and remove. (Figure G)
(Figure G)
(Figure F)
11. Remove the (10) 9/32” screws securing
the radio/climate control panel, and
then unclip and remove. (Figure H)
12. Remove the (4) 9/32” screws securing
the display screen, and then remove.
(Figure I)
13. Remove the (4) 9/32” screws securing
the radio chassis, and then remove.
(Figure I)
Continue to Kit Preparation


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-5722

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-5722 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd