Metra 99-3309B Handleiding

Metra Carkit 99-3309B

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-3309B (12 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/25/18 INST99-3309B
I N S TA L L AT I O N I N S T R U C T I O N S
99-3309B
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (10) Panel clips • F) Axxess interface and wiring harness (not
shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly
–ISO DIN radio provision with pocket ..................4
–ISO DDIN radio provision .....................................4
Axxess Interface Installation .............................5-9
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface included
Antenna Adapter: 40-EU55
A B C ED
Chevrolet Spark 2013-2015
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
(Figure A) (Figure B)
1. Unclip and remove the radio trim panel.
(Figure A)
2. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure B)
Continue to kit preparation
REV. 5/25/2018 INST99-3309B 3
KIT PREPARATION
(Figure A) (Figure B)
From the factory radio trim panel:
1. Unclip and remove the vents from the
factory panel. (Figure A)
2. Unclip and remove the hazard button
from the trim panel. (Figure A)
3. Remove (5) Phillips screws securing the
upper display shroud from the factory
panel. (Figure A)
Step 1
Step 3
Step 2
Step 3
To the 99-3309B radio trim panel:
1. Clip in the factory vents and hazard
button. (Figure B)
2. Secure the upper display shroud using
the factory screws. (Figure B)
3. Attach the (10) panel clips provided.
Step 1
Step 2
Step 1
Step 2


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 99-3309B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-3309B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit