Metra 99-2023B Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Metra 99-2023B (14 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
INSTALLATION INSTRUCTIONS FOR PART 99-2023B
APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 1/31/2013 INST99-2023B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in
beforereconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
• A) Radio Trim Panel • B) Radio Brackets • C) Pocket • D) Climate Control Trim Ring
• E) Climate Control Trim Panel • F) Data Interface • G) Interface Harness • H) (2) #8 x 3/8” Pan-head
Phillips screws • I) (4) #8 x 3/8” Truss-head Phillips screws • J) Switch Blank Plate
KIT COMPONENTS
• ISO DIN Head unit provision with pocket
• DDIN Head unit provisions
• Painted Black to match factory finish
• Painted Brown to match factory finish
KIT FEATURES
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • GMOS-044
Antenna Adapter: • 40-EU55 - amplified antenna adapter (sold separately)
• Panel removal tool • Phillips screwdriver
• Socket Wrench
TOOLS REQUIRED
(Not designed for NAV equipped vehicles) Dash Disassembly
– Buick Regal 2011-up ............................................ 2
Kit Assembly
– Radio panel assembly .......................................... 3
– Climate control panel assembly ............................ 3
– ISO DIN head unit provisions ................................ 4
– DDIN head unit provisions .................................... 4
Interface Installation
– Interface Installation ..........................................5-7
B C D E FA
HJ
GI
99-2023B
1. Unsnap and remove the pocket/
ashtray assembly. (Figure A)
2. Unsnap and remove the trim above
the glove box. (Figure B)
3. Unsnap and remove the trim
between the radio and steering
wheel. (Figure C)
4. Unsnap and remove the vent/
screen panel above the radio. (take
caution not to cycle the key with
this panel unplugged) (Figure D)
Dash Disassembly
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C) (Figure F)
5. Remove four 7mm screws to
remove radio face and climate
controls. (Figure E)
6. Remove four 7mm screws to
remove the radio chassis.
(Figure F)
Continue to kit assembly
99-2023B
Radio Panel Assembly Climate Control Panel Assembly
1. Unsnap the climate controls,
traction control switch, park assist
switch and start/stop switch (if
equipped) from the factory radio
panel. (Figure A)
2. Snap the switches into the Metra
kit panel. Note: If no start/
stop switch is present use the
supplied switch blank plate.
(Figure A) (Figure B)
Climate Controls
Parking Assist switch Traction Control switch Start/Stop switch
3. Snap the climate control in the
climate control panel.
Note: Minor sub dash modification
may be necessary to allow for
clearance of the climate control
(See inset). (Figure B)
Shaded areas indicated may
need minor clearancing.
Climate control
trim ring
Climate controls
Climate control
trim panel


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-2023B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-2023B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd