Metra 95-8239B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 95-8239B (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 8/17/2015 INST95-8239B
Installation instructions for part 95-8239B
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
• ISO DDIN radio provision
Painted Matte Black
A) Radio Trim Panel • B) Radio Brackets • C) (2) #8 x 3/8 Phillips Truss Head Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761
Antenna Adapter: • 40-LX11
• Panel removal tool • Phillips screwdriver • Socket Wrench
TOOLS REQUIRED
Dash Disassembly ................................................. 2
Kit Assembly
ISO DDIN radio provision 3 ......................................
Table of Contents
A B C
95-8239B
1. Unclip and remove the trim panel
from around the radio including the
hazard switch. (Figure A)
2. Remove (4) 8mm bolts securing
the factory radio, then unplug and
remove the radio. (Figure B)
Continue to kit assembly
Dash Disassembly
(Figure A) (Figure B)
95-8239B
Kit Assembly
(Figure A) (Figure B)
ISO DDIN radio provision
1. Secure the to the radio brackets
radio trim panel using (2) #8 x
3/8” Phillips truss head screws
supplied. (Figure A)
2. Secure the radio to the radio-
bracket/trim assembly using
screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in reverse
order of disassembly.


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 95-8239B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 95-8239B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd