Metra 95-5817 Handleiding

Bekijk gratis de handleiding van Metra 95-5817 (5 pagina’s), behorend tot de categorie Carkit. Deze gids werd als nuttig beoordeeld door 71 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over Metra 95-5817 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

120 95-5817 Supplemental Instructions

for Double-DIN Receiver Applications

120 95-5817I

Revision 04/05/11

*120955817I*

Permanent modifications will be necessary in order

to allow a Double-DIN receiver to fit into the dash of

vehicles that use the 120 95-5817 installation kit.

Removal of dash material is required. Once

modifications are made, the factory unit may not

properly fit if reinstalled.

Notes:



Do not remove too much material. It is better to

remove portions and measure or test fit as you go.



Test fit using the receiver only. The side brackets

should not be in place. If the receiver is fully

snapped into place, it cannot be removed without

the dash panel being removed.

1.Using a file or rotary tool, carefully remove

portions from the top and bottom rim of the dash

opening as shown.

2.Once a proper fit is achieved, complete

receiver installation following instructions supplied

with the 120 95-5817 installation kit.

Tools Required

File or

Rotary

Tool

Copyright 2011 Crutchfield Corporation

R

1-800-955-9094

TECHNICAL SUPPORT



Cut out these areas

Cut out these areas

Always be careful when cutting or drilling in a vehicle. WEAR

EYE PROTECTION. Be aware of things such as wiring,

windows, fuel lines and safety devices. Check drilling depth

and location to avoid damage to vehicle appearance.

CAUTION:

!

Product specificaties