Metabo CM 5SB Handleiding
Metabo
Zaagmachine
CM 5SB
Lees hieronder de đ handleiding in het Nederlandse voor Metabo CM 5SB (41 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/41
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
Model
ModĂšle
Modelo CM 5SB Cutter
Scie Ă diamant
Cortadora
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool.
This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE DâEMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraßner la
mort ou de sérieuses blessures corporelles !
Ce mode dâemploi contient dâimportantes informations Ă propos de la sĂ©curitĂ© de ce produit.
PriĂšre de lire et de comprendre ce mode dâemploi AVANT dâutiliser lâoutil motorisĂ©. Garder
ce mode dâemploi Ă la disponibilitĂ© des autres utilisateurs et propriĂ©taires avant quâils
utilisent lâoutil motorisĂ©.
Ce mode dâemploi doit ĂȘtre conservĂ© dans un endroit sĂ»r.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¥La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene informaciĂłn importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica.
Este manual debe ser guardado en un lugar seguro.
2
CONTENTS
English Page Page
IMPORTANT SAFETY INFORMATION ..................... 3
MEANINGS OF SIGNAL WORDS ............................. 3
SAFETY ....................................................................... 3
GENERAL POWER TOOL SAFETY WARNINGS ...... 3
CUT-OFF MACHINE SAFETY WARNINGS ............... 4
KICKBACK AND RELATED WARNINGS .................. 5
SPECIFIC SAFETY RULES AND SYMBOLS ............ 6
DOUBLE INSULATION FOR SAFER OPERATION ... 7
FUNCTIONAL DESCRIPTION .................................... 8
NAME OF PARTS ...................................................... 8
SPECIFICATIONS ..................................................... 8
ASSEMBLY AND OPERATION ................................... 9
APPLICATIONS ......................................................... 9
PRIOR TO OPERATION ............................................9
INSTALLING DUST COLLECTION HOSE ...............10
MOUNTING AND DISMOUNTING THE
DIAMOND WHEEL .......................................... 10
CUTTING PROCEDURES ......................................10
MAINTENANCE AND INSPECTION .........................11
ACCESSORIES .........................................................12
STANDARD ACCESSORIES ...................................12
OPTIONAL ACCESSORIESâŠsold separately ........ 12
PARTS LIST ...............................................................37
TABLE DES MATIERES
Français Page Page
INFORMATIONS IMPORTANTES DE SĂCURITĂ ..13
SIGNIFICATION DES MOTS
DâAVERTISSEMENT ........................................13
SECURITE .................................................................13
AVERTISSEMENTS DE SĂCURITĂ GĂNĂRAUX
CONCERNANT LES OUTILS ĂLECTRIQUES
... 13
AVERTISSEMENTS DE SĂCURITĂ POUR LES
TRONĂONNEUSES Ă DISQUES ....................15
REBOND ET AVERTISSEMENTS ........................... 16
REGLES DE SECURITE SPECIFIQUES ET
SYMBOLES .....................................................16
DOUBLE ISOLATION POUR UN
FONCTIONNEMENT PLUS SUR ..................... 18
DESCRIPTION FONCTIONNELLE ...........................19
NOM DES PARTIES ................................................ 19
SPECIFICATIONS ................................................... 19
ASSEMBLAGE ET FONCTIONNEMENT .................. 20
UTILISATIONS ........................................................ 20
AVANT LâUTILISATION ............................................ 20
INSTALLATION DU TUYAU SOUPLE
COLLECTEUR DE POUSSIERE ...................... 21
MONTAGE ET DĂMONTAGE DE LA MEULE
DIAMANTĂE .................................................... 21
MĂTHODES DE COUPE .........................................21
ENTRETIEN ET INSPECTION ..................................22
ACCESSOIRES .........................................................24
ACCESSOIRES STANDARD ...................................24
ACCESSOIRES SUR OPTIONâŠ
vendus séparément ..........................................24
LISTE DES PIECES...................................................37
ĂNDICE
Español Pågina Pågina
INFORMACIĂN IMPORTANTE SOBRE
SEGURIDAD .................................................... 25
SIGNIFICADO DE LAS PALABRAS DE
SEĂALIZACIĂN ...............................................25
SEGURIDAD ..............................................................25
ADVERTENCIAS DE SEGURIDAD GENERAL DE
LA HERRAMIENTA ELĂCTRICA .....................25
ADVERTENCIAS DE SEGURIDAD DE LA
CORTADORA...................................................27
REBOTE Y ADVERTENCIAS RELACIONADAS ...... 28
NORMAS Y SĂMBOLOS ESPECĂFICOS
DE SEGURIDAD .............................................. 28
AISLAMIENTO DOBLE PARA OFRECER UNA
OPERACIĂN MĂS SEGURA ........................... 30
DESCRIPCIĂN FUNCIONAL .................................... 31
NOMENCLATURA .................................................. 31
ESPECIFICACIONES .............................................. 31
MONTAJE Y OPERACIĂN ........................................32
APLICACIONES ..................................................... 32
ANTES DE LA OPERACIĂN ...................................32
INSTALACION DE LA MANGUERA DE
RECOGIDA DE POLVO ....................................33
MONTAJE Y DESMONTAJE DEL DISCO DE
DIAMANTE ......................................................33
PROCEDIMIENTOS DE CORTE ............................. 33
MANTENIMIENTO E INSPECCIĂN ..........................34
ACCESORIOS ...........................................................36
ACCESORIOS ESTĂNDAR ....................................36
ACCESORIOS OPCIONALESâŠâŠ
de venta por separado .....................................36
LISTA DE PIEZAS .....................................................37
English
3
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the âSAFETYâ section of this Instruction Manual and in the sections which contain
the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identiïŹ ed by WARNINGS on the power tool
and in this Instruction Manual.
NEVER use this power tool in a manner that has not been speciïŹ cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or may
cause machine damage.
NOTE emphasizes essential information.
SAFETY
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ïŹ ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inïŹ uence of drugs, alcohol or
medication.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, ïŹ re and/or serious injury.
Save all warnings and instructions for future reference.
The term âpower toolâ in the warnings refers to your mains operated (corded) power tool or battery- -operated (cordless)
power tool.
Product specificaties
Merk: | Metabo |
Categorie: | Zaagmachine |
Model: | CM 5SB |
Heb je hulp nodig?
Als je hulp nodig hebt met Metabo CM 5SB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaagmachine Metabo
8 Januari 2024
8 December 2023
8 December 2023
13 November 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
27 Augustus 2023
Handleiding Zaagmachine
- Zaagmachine Bosch
- Zaagmachine AEG
- Zaagmachine DeWalt
- Zaagmachine Ford
- Zaagmachine Al-ko
- Zaagmachine Atika
- Zaagmachine BabyGO
- Zaagmachine Batavia
- Zaagmachine Bavaria
- Zaagmachine Bebe Confort
- Zaagmachine BGU
- Zaagmachine Blucave
- Zaagmachine Bort
- Zaagmachine Brennenstuhl
- Zaagmachine Bruder Mannesmann
- Zaagmachine Budget
- Zaagmachine Defort
- Zaagmachine Dolmar
- Zaagmachine Dremel
- Zaagmachine Duro
- Zaagmachine Echo
- Zaagmachine Einhell
- Zaagmachine Elektra Beckum
- Zaagmachine Elu
- Zaagmachine Ergofix
- Zaagmachine Exakt
- Zaagmachine Fein
- Zaagmachine Felisatti
- Zaagmachine Ferm
- Zaagmachine Ferrex
- Zaagmachine Festool
- Zaagmachine Flex
- Zaagmachine Florabest
- Zaagmachine FOM
- Zaagmachine Fuxtec
- Zaagmachine Gamma
- Zaagmachine Gardena
- Zaagmachine Gardenline
- Zaagmachine Germania
- Zaagmachine Global
- Zaagmachine Greenworks
- Zaagmachine Grizzly
- Zaagmachine Gude
- Zaagmachine Gude Pro
- Zaagmachine Hammer
- Zaagmachine Hikoki
- Zaagmachine Hitachi
- Zaagmachine Holzmann
- Zaagmachine Homelite
- Zaagmachine Husqvarna
- Zaagmachine Huvema
- Zaagmachine Hyundai
- Zaagmachine Ideal
- Zaagmachine Kompernass
- Zaagmachine Kress
- Zaagmachine Lux Tools
- Zaagmachine Luxor
- Zaagmachine Maestro
- Zaagmachine Makita
- Zaagmachine Maktec
- Zaagmachine Matrix
- Zaagmachine Max
- Zaagmachine Maxx
- Zaagmachine McCulloch
- Zaagmachine Milwaukee
- Zaagmachine Parkside
- Zaagmachine Pattfield
- Zaagmachine Plantiflor
- Zaagmachine Powerfix
- Zaagmachine Powerplus
- Zaagmachine Remington
- Zaagmachine Robust
- Zaagmachine Ryobi
- Zaagmachine Scheppach
- Zaagmachine Shindaiwa
- Zaagmachine Silverline
- Zaagmachine Skil
- Zaagmachine Stanley
- Zaagmachine Sterwins
- Zaagmachine Stiga
- Zaagmachine Stihl
- Zaagmachine Tanaka
- Zaagmachine Texas
- Zaagmachine Toledo
- Zaagmachine Toolcraft
- Zaagmachine Topcraft
- Zaagmachine Trotec
- Zaagmachine Troy-Bilt
- Zaagmachine Varo
- Zaagmachine Vonroc
- Zaagmachine Westfalia
- Zaagmachine Workzone
- Zaagmachine Worx
- Zaagmachine Zipper
- Zaagmachine Ozito
- Zaagmachine Black And Decker
- Zaagmachine Cocraft
- Zaagmachine Draper
- Zaagmachine Meec Tools
- Zaagmachine Lionelo
- Zaagmachine Clarke
- Zaagmachine Genesis
- Zaagmachine Hilti
- Zaagmachine Cobra
- Zaagmachine Hobart
- Zaagmachine ACG
- Zaagmachine Cotech
- Zaagmachine Power Craft
- Zaagmachine Tacklife
- Zaagmachine Truper
- Zaagmachine Fieldmann
- Zaagmachine Mafell
- Zaagmachine Proxxon
- Zaagmachine Biltema
- Zaagmachine Porter-Cable
- Zaagmachine Sun Joe
- Zaagmachine Yard Force
- Zaagmachine Challenge
- Zaagmachine EGO
- Zaagmachine Hurricane
- Zaagmachine Sovereign
- Zaagmachine Spear & Jackson
- Zaagmachine Dedra
- Zaagmachine Graphite
- Zaagmachine Narex
- Zaagmachine RIDGID
- Zaagmachine Tryton
- Zaagmachine Herkules
- Zaagmachine Powerworks
- Zaagmachine Sthor
- Zaagmachine Craftsman
- Zaagmachine Rikon
- Zaagmachine Verto
- Zaagmachine Erbauer
- Zaagmachine Snow Joe
- Zaagmachine Chicago Pneumatic
- Zaagmachine Alpha Tools
- Zaagmachine Hazet
- Zaagmachine Yato
- Zaagmachine Jonsered
- Zaagmachine Qualcast
- Zaagmachine Avantco
- Zaagmachine Masport
- Zaagmachine Morrison
- Zaagmachine Baumr-AG
- Zaagmachine Martha Stewart
- Zaagmachine IKRA
- Zaagmachine MTM
- Zaagmachine Meister Craft
- Zaagmachine Ćucznik
- Zaagmachine King Craft
- Zaagmachine Toolson
- Zaagmachine Wolfcraft
- Zaagmachine Kreg
- Zaagmachine Vulcan
- Zaagmachine Challenge Xtreme
- Zaagmachine Pro-Cut
- Zaagmachine Power Smart
- Zaagmachine Backyard Pro Butcher Series
- Zaagmachine EFA
- Zaagmachine Einhell Bavaria
- Zaagmachine McKenzie
- Zaagmachine Proviel
- Zaagmachine Ultranatura
- Zaagmachine FIXIT
- Zaagmachine Ergotools Pattfield
- Zaagmachine MyTool
- Zaagmachine Bavaria By Einhell
- Zaagmachine Donau Elektronik
- Zaagmachine Rona
Nieuwste handleidingen voor Zaagmachine
26 April 2024
15 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
9 April 2024