Mercusys MS110GMP Handleiding

Bekijk gratis de handleiding van Mercusys MS110GMP (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Mercusys MS110GMP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

LED Explanation

MS106LP/MS106P/MS110GMP

Quick Installation Guide

Connection

PC

PoE Ports

1. PoE ports can also connect to non-PoE devices, but only transmit data.

2. Non-PoE ports (ports 5-6 of MS106LP/MS106P and uplink ports of MS110GMP) are

recommended to connect to uplink devices like gateways.

3. By default, ports 1-2 of MS106LP/MS106P have higher priority than other ports in

transmitting data if network congestion occurs. It is recommended to connect key network

devices (network cameras, APs, etc.) to ports 1-2.

Notes:

Internet

IP CameraAPIP Phone

Powered Device (PD)

Power

On: The power is on

O: The power is o

Link/Act Status

On: Link present but no activity

Flashing: Transmitting or receiving data

O: No link

PoE Status

On: Providing PoE power

O: Not providing PoE power

Link/Act; Uplink 1, Uplink 2

Green On: Running at 1000 Mbps, but no

activity.

Green Flashing: Running at 1000 Mbps and

is transmitting or receiving data.

Yellow On: Running at 10/100 Mbps, but no

activity.

Yellow Flashing: Running at 10/100 Mbps

and is transmitting or receiving data.

O: No link

Switch Explanation

O: Ports run at100/10 Mbps (1000/100/10 Mbps for MS110GMP) and support PoE

power supply up to 100m away.

On: Ports run at 10 Mbps and support PoE power supply up to 250m away.

Extend (For MS106LP/MS106P/MS110GMP)

O: The PoE Auto Recovery function is disabled.

On: The switch will constantly detect the working status of a PoE powered device (PD).

When the switch nds that the PD works abnormally, the switch will reboot it.

Recovery (For MS106LP/MS106P/MS110GMP)

O: Ports can transmit data with each other.

On: The isolated ports cannot transmit data with each other. They can transmit data only

with the uplink ports (ports 5-6 of MS106LP and MS106P/uplink ports of MS110GMP).

Isolation (For MS106LP/MS106P/MS110GMP)

O: All the ports transmit data with the same priority.

On: The specic ports transmit data with a higher priority than other ports.

Priority (Only for MS110GMP)

The images in this guide are for demonstration only and may differ from your actual product.

© 2025 MERCUSYS 7100000115 REV1.2.1

MS106LP/MS106P:MS110GMP:

Power

On: The power is on

O: The power is o

PoE Status

On: Providing PoE power

Flashing: PoE fault

O: Not providing PoE power

PoE Max

On: 104 W≤Total power supply < 111 W

Flashing: Total power supply ≥ 111 W

O: Total power supply < 104 W

DC Per Adapterow

AC Power Cord

Product specificaties