Melinera IAN 322030 Handleiding


Bekijk gratis de handleiding van Melinera IAN 322030 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over Melinera IAN 322030 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/1
1H00ISMUGB-LI
Manufacturer and Service Address:
Tecnodidattica S.p.A.
Via Garibaldi, 67 I - 16040 San Colombano C. (GE)
Tel. +39 0185 358101 - Fax +39 0185 358592
info@tecnodidattica.it
Type Melinera/GLOBUS LED
IAN 322030_1901
0-14
Luminaire not
adapted to children
under 14, as powered
at 220-240 V ~
GB IE NI Luminaire
designed for self-
shielded lamps
GB IE NI This symbol
indicates that the lamp
cannot be used if the
outer shell is broken
Recyclable
GB IE NI Double
Insulation
GB IE NI Not
dimmable
GB IE NI Alternating
current
˜
GB IE NI For internal
use
L= 51 mm
Ø= 23 mm
3000
≥ 80
instant full
of full light output
220-240 V
160 lm
160 lm
Aufwärmzeit für 60%
der Lichtleistung
Sofort volles
Licht
100.000
25.000 h
5
[ ]Kelvin
GB IE NI Do not
disperse the product in
the environment
GB IE NI Illuminated globe
Intended use -
Illuminated Geographical Globe 30 cm for educational use.
Suitable for indoor use only.
Contents of the box
Illuminated globe (bulb included) with meridian arc attached and base, instructions leaet.
Technical specications Globe Ø approx. 30 cm
Overall height approx. 41 cm
Scale 1:42,500,000
Cable lenght approx. 1,88 m
Bulb 220-240 V ~, 50/60 Hz max 18W E14
Safety Instructions
Please follow these warnings to avoid personal injury or damage!
The illuminated globe is not a toy. Children should use it only under adult supervision.
The illuminated globe is an electrical appliance if placed on raised surfaces, make sure it
is stable to avoid slipping or falling.
• A damaged cable should only be replaced by the manufacturer or a qualied electrician.
If after unpacking and connecting, the light does not work, make sure the bulb is
screwed in tightly.
Never remove the plug from the socket by pulling on the cord.
Do not hang or drape anything on the globe.
Keep these instructions for future reference.
Instructions for assembling the globe
Screw in the lower part of the arc to the base (see picture A) by turning the base. (See
picture B).
Plug in into the power outlet.
• Switch the light on/o.
Instructions for changing the bulb -
CAUTION! Always use the correct bulb size:
LED type E14, max 18W, 220-240V ~ 50/60 Hz.
Disconnect the illuminated globe from the electric supply and wait a few minutes for the
bulb to cool down.
Carefully pull up the meridian arc until the axel comes out of the globe. (See picture 1).
Hold the meridian arc up and push the globe forward. (See picture 2, arrow direction 2).
Be careful not to scratch the globe with the axel.
To change the bulb, please use a cloth.
Now lift out the globe from the lamp base (see picture 2, arrow direction 3) and unscrew or
tighten the light bulb (see picture 3, arrow direction 4 or 5).
Disposal of plug - Applicable for globes equipped with UK plug only
If the non rewireable plug is to be cut o, the removed plug should be disposed of
carefully as there is a shock hazard should the plug be inserted into a live socket.
Replacing fuse - Applicable for globes equipped with UK plug only
This plug is tted with a 3A fuse. In the event of the fuse failing it should only be replaced
by a 3A fuse that complies with BS1362.
The wires in the main lead are coloured in accordance with the following code:
Blue = Neutral & Brown = Live.
The wires should be connected to the plug terminals as follows:
Blue Neutral
Brown Live
Do not connect either wire to the earth terminal.
Caring for your globe
Firstly, unplug your globe and allow it to cool down.
Clean the surfaces by using a damp cloth.
Use water only, never use alcohol or other cleaning solvents which would permanently damage
the surfaces.
Do not expose to direct sunlight.
DISPOSAL OF WASTE EQUIPMENT BY USERS IN PRIVATE HOUSEHOLDS
IN THE EUROPEAN UNION - This symbol on the product or on its packaging
indicates that this product must not be disposed of with your other household
waste. Instead, it is your responsibility to recycle this product by handing this
equipment to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate recycling of the equipment at the time of its disposal
will help to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For more information about where you can
drop o your waste equipment for recycling, please contact your local council or the shop
where you purchased the product.
- WARRANTY The product is under warranty for a period of 3 years from the date
of purchase. Please keep your receipt as proof of purchase. This warranty covers all
substitutions or repairs due to material or manufacturing defects at our discretion. This
warranty does not cover broken lamp bulbs. Once the warranty has expired, you can
send your globe to the address mentioned below for repairs at your own expense. Your
legal rights shall not be limited by our conditions of warranty. Please phone or email
the customer service center regarding the procedure to follow when your product needs
substituting or mending.


Product specificaties

Merk: Melinera
Categorie: Niet gecategoriseerd
Model: IAN 322030

Heb je hulp nodig?

Als je hulp nodig hebt met Melinera IAN 322030 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden