Meliconi Control 2+ Handleiding
Meliconi Afstandsbediening Control 2+
Bekijk gratis de handleiding van Meliconi Control 2+ (5 pagina’s), behorend tot de categorie Afstandsbediening. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.9 sterren uit 9 reviews. Heb je een vraag over Meliconi Control 2+ of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
Control 2.1
Thank you for choosing a Meliconi remote control.
The Control 2.1 remote control is designed to command a TV and a DECODER (satellite or digital terrestrial).
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio
frequency (e.g. voice commands and pointers) are not supported.
The remote control requires 2 new 1.5V AAA/LR03 alkaline batteries, not included in the
package. Insert with the correct polarity as shown in figure.
DO NOT use rechargeable batteries.
BATTERIES TEST:Press and hold the 5 button and check that the LED remains on
continuously until the button is released. If the light is off or blinks, the inserted batteries are low,
therefore they need replacement.
WARNING:
As the remote control is capable of controlling 2 devices, during setup (and also during normal use), you must select the
operation mode; then define which device you want to control. (TV / STB)
To select the operation mode, press the button quickly and repeatedly until the LED corresponding to
the device you want to operate is switched on. (TV = red led / STB = green led)
Before using the remote control, for each device you wish to control, it is essential to set a specific code, it matched.
Identify the specific code and set it into the remote control using one of the following ways:
MANUAL
SEARCH
SMARTPHONE
TABLET -WEB
ACTIVATION OF REMOTE CONTROL
SELECTION OF OPERATING MODE
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
SAFETY WARNINGS
The remote control and batteries should not be exposed to excessive heat such as sunlight, fire
or the like.
The product is not a toy. Keep out of reach of children or domestic animals.
Keep this booklet for future reference
Product specificaties
| Merk: | Meliconi |
| Categorie: | Afstandsbediening |
| Model: | Control 2+ |
| Kleur van het product: | Zwart |
| Type verpakking: | Doos |
| Accu/Batterij voltage: | 1.5 V |
| Ondersteund aantal accu's/batterijen: | 2 |
| Interface: | IR Draadloos |
| Aantal per verpakking: | 1 stuk(s) |
| Merkcompatibiliteit: | Universeel |
| Maximumbereik: | - m |
| Backlight toetsen: | Nee |
| Oplaadbaar: | Nee |
| Input type: | Drukknopen |
| juiste gebruik afstandsbediening: | TV, TV set-top box |
| Batterijtechnologie: | Alkaline |
| Type batterij: | AAA |
| Number of devices supported: | 2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Meliconi Control 2+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Afstandsbediening Meliconi
13 Januari 2026
17 November 2024
14 Februari 2024
5 Januari 2024
8 Juli 2023
7 Juli 2023
6 Juli 2023
5 Juli 2023
5 Juli 2023
4 Juli 2023
Handleiding Afstandsbediening
Nieuwste handleidingen voor Afstandsbediening
13 Januari 2026
12 Januari 2026
5 Januari 2026
4 Januari 2026
4 Januari 2026
24 December 2025
2 December 2025
10 November 2025
10 November 2025
10 November 2025