MB Quart MRGB-APP2 Handleiding

Bekijk gratis de handleiding van MB Quart MRGB-APP2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over MB Quart MRGB-APP2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

After properly installing and completing the setup of MB Quart MRGB-APP2 LED Controller to

your vehicle installation follow the steps below for application setup and how to use.

MRGB-APP2

LED CONTROLLER

USER & INSTALLATION GUIDE

1. Scan the QR Code found the the MRGB-APP2 with your Android/iPhone/mobile device, that

will take you to the app store to download the controller app.

2. Install the LED Chord application from your mobile app store.

3. Go to your Bluetooth Settings on your phone and make sure Bluetooth is turned on.

(Note - For Android users, you will need to go to Location Services.) With Bluetooth turned

on your mobile device - launch/open the LED Chord application.

4. With Bluetooth on and LED Chord application open and running – find “SP107E” within

the device list and select to connect the controller to your mobile device.

5. LED Chord application is now connected to your phone, and you are ready to explore the

application and all of its features. Note: You can change the devices name by long pressing

on the connect device “SP107E” and tapping “Rename”.

6. Set RGB order and LED driver IC Type to the following settings – “RGB WS2811”

7. Set segment and pixels to following recommended settings

“SEG. 16 – PIXEL/SEG. 60 – TOTAL 960”

8. LED Chord application is now connected to your phone, and you are ready to explore the

application and all of its features.

The included 3.5mm Y cable/white power plug, nor the below pictured wire will be used in

MB Quart specific RGB LED applications.

NOTE

Product specificaties