MB Quart MBQRG-STG3-1 Handleiding


Bekijk gratis de handleiding van MB Quart MBQRG-STG3-1 (23 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.1 sterren uit 3 reviews. Heb je een vraag over MB Quart MBQRG-STG3-1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/23
Page 1 of 28
Installation Instructions
Model:
Polaris Ranger
Description:
Stage 3 Install
Part Number:
MBQRG-STG3-1 & MBQRG-STG3-RC-1
Assembly Time:
120 Min (2-Hours)
1 GMR-LED w/Housing (MBQRG-RAD-1) (MBQRG-STG3-1 only) 1
2 6.5 Dash Speakers (MBQRG-FPOD-1) 2
3 10 Subwoofer w/Enclosure (MBQRG-SUB-1) 1
4 MBQRG-ACC-1 1
5NA2-400.1 Amplier 1
6NA2-400.2RC Amplier 1
1 Bojo Tool
2 Panel Clip Pliers
3 1/8 Drill Bit
4 Drill
5 T25 Torx Bit
7 10mm Socket
8 Rachet
Parts List
Tools Required
Before you begin, read through these instructions and check that
all parts are present. Always disconnect negative battery terminal
prior to installation. Please note that MB Quart cannot assume any
responsibility for damage resulting from incorrect installation.
Page 2 of 23
Dash Disassembly
● Remove hood by turning
two latches
● Remove two push pins from
center cup holder
● Remove two push pins from
instrument cluster. Remove and
disconnect connector on back
Page 3 of 23
Dash Disassembly
● Open upper glove box and
remove four T20 torx screws and
then lift assembly out of vehicle
● Remove three push pins on the
passenger side dash
● Remove three push pins on the
driver side dash


Product specificaties

Merk: MB Quart
Categorie: Niet gecategoriseerd
Model: MBQRG-STG3-1

Heb je hulp nodig?

Als je hulp nodig hebt met MB Quart MBQRG-STG3-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden