Martin ELP Zoom Lens Handleiding

Martin Verlichting ELP Zoom Lens

Lees hieronder de đź“– handleiding in het Nederlandse voor Martin ELP Zoom Lens (1 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
ELP ZOOM LENS
Installation and Safety Manual
Installation
1. Rotate zoom lens (1) 45 degrees from home position and connect to the ELP body*
2. Rotate zoom lens (2) back to secure to the ELP body into home position.
3. Tighten the screws (3) and (4) to lock into position.
4. Tighten screws (5) at both sides to prevent sideways . movement
*Home position is identified by the Martin logo positioned on the side of the zoom lens as shown in the diagram above
Securing with a safety cable
Secure the fixture with a safety cable (or other secondary attachment) that is approved for the
weight of the fixture so that the safety cable will hold the fixture if the primary attachment fails.
Loop the safety cable through the attachment eye at the rear of the fixture and at the front of
the lens tube (see illustration below) around a secure anchoring point.
If a safety cable attachment point becomes damaged or deformed, do not use the fixture.
Return it to a Martin Service Centre for repair.


Product specificaties

Merk: Martin
Categorie: Verlichting
Model: ELP Zoom Lens

Heb je hulp nodig?

Als je hulp nodig hebt met Martin ELP Zoom Lens stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Martin

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting