Marshall VS-PTC-50 Handleiding
Pagina's 11 Niet gecategoriseerd
Bekijk de handleiding van Marshall VS-PTC-50 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Marshall Electronics
Broadcast A/V Division
VS-PTC-50
Camera PTZ/On-Screen Display Menu
Mini Joystick Controller
Thank you for purchasing this Marshall Electronic
’
s product.
Please read the User Manual thoroughly before attempting to setup & use.
If you have any problems with this product please contact Marshall Electronics.
Tel: (800) 800-6608 / (310) 333-0606
User Manual
www.LCDracks.com
Caution
List Of Items
1.1 Function Keys On Front Panel
Keyboard Specs
The LCD screen can be damaged by excessive pressure, direct sunlight,
or liquids. Joystick and keyboard should be used in environments within
the temperature and humidity range specied.
Please follow instructions dened in this manual for setup and operation.
1. Power adapter (Input: 100-240VAC 50/60Hz, Output: DC 12V)
2. Users Manual
1. Joystick
2. LCD screen
3. Function keys
4. Speed dome Setup
and recall keys
ItemParameters
Power SupplyDC12V 1A ±10%
Temperature-10°C ~ 55°C
Humidity
≤90%RH (No cream node)
Communication
RS485 Half-duplex
Baud Rate2400bps, 4800bps, 9600bps, 19200bps, 38400bps
Screen128*32 LCD screen
Package Size
180 (L) x 165 (W) x 90 (H)mm
①
②
④
③
1
0
2
3
4
5
6
7
89
F1
Setup
Esc
Preset
Shot
Pattern
RunAuto
Cam
A
ux on
A
ux off
O
pen
C
lose
Tele
Wide
Near
F
ar
2
VS-PTC-50 Manual
(Esc)
Exit key: exit and back to previous menu;
(Setup)
Setup key: press and hold for 3s to setup keyboard
’
s parameter.
(F1)
Adjust the control speed, it has 4 level: 1, 2, 3, 4
(Preset)
Preset special status of ptz (including direction and zoom times).
This key should be used together with number key;
(
Shot)
Recall special status of ptz (including direction and zoom times).
This key should be used together with number key.
(Pattern)
Start/stop pattern record: press for 3 seconds to start pattern
record, after all operation, press this key again to stop pattern
record, this key should be used together with number key.
(Run)
Recall the stored pattern, this key should be used together with
number key.
(0) ~ (9)
Number key: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
(Auto)
Control ptz rotate in horizontal direction automatically or clear
input number: when user input some numbers, press this key
can delete the numbers, else it will control ptz rotate in horizontal
direction automatically.
(Cam)
Address selection key: select ptz address; this key should be
used together with number key.
(Tele)
Zoom in: zoom in the object, enlarge the object size.
(Wide)
Zoom out: zoom out the object, reduce the object size.
(Open)
Iris + / enlarge iris.
(Close)
Iris - / reduce iris.
(Far)
Focus+ / adjust the lens focus on distant object.
(Near)
Focus- / adjust the lens focus on near object.
(Aux on)
Aux on: turn on ptz
’
s aux. This key should be used together
with number key; directly press this key without keying in any
number, the controlled ptz ID will add 1.
(Aux off)
Aux off: turn off ptz
’
s aux. This key should be used together
with number key; directly press this key without keying in any
number, the controlled ptz ID will take away 1.
(Aux off)
Press and hold for 3s to recall number 95 preset, normally it will
be opening the menu of ptz.
3
www.LCDracks.com
Product specificaties
| Merk: | Marshall |
| Categorie: | Niet gecategoriseerd |
| Model: | VS-PTC-50 |
Heb je hulp nodig?
Als je hulp nodig hebt met Marshall VS-PTC-50 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden