Marshall V-LCD4.3-PRO-R Handleiding

Bekijk gratis de handleiding van Marshall V-LCD4.3-PRO-R (1 pagina’s), behorend tot de categorie Monitor. Deze gids werd als nuttig beoordeeld door 29 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over Marshall V-LCD4.3-PRO-R of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Marshall Electronics

V-LCD4.3-PRO-R

To operate unit, insert the power plug into the power jack (center pin is

+12VDC located on the side of the monitor. Turn the unit on by pushing

the power button-in. The unit is turned off by depressing the power

button. The unit is equipped with NTSC/PAL auto recognition logic.

Simply supply a NTSC or PAL composite video signal to either of the

two video BNC connectors labeled ‘IN’. Select the active BNC input by

using the selector switch. Adjust the picture by using the control knobs

on the top of the unit.

The V-LCD4.3-PRO-R is equipped with an active loop-through circuit.

This loop-through will only work when power is supplied to the

monitor.The monitor also has a 1/4-20 mount located on the bottom

of the unit. This is useful when mounting the monitor on the top of a

camera by using a hot shoe mount (Marshall part# ) or other M-SM03

mounting devices.

Display4.3” LCD Active Matrix

Input2 NTSC/PAL Inputs with Loop-through

ColorFull Color

Picture480H x 272V

Pitch0.066(W) mm x 0.198(H) mm

ControlsPower On/O󰀨, Color, Brightness, Tint, Contrast

Brightness500 nits

Power Supply12 VDC, 350mA

ConnectorsVideo BNC, 5.5mm DC power jack

Dimentions5.51”W x 3.62”H x 1.81”D

1.Contrast

2.Tint

3.Color

4.Brightness

5.Selector Switch

6.Power On/Off

7.Power In 12VDC

8.BNC Inputs and Outputs

1234

5

6

8

7

1/4”-20 mount

Product specificaties