Marshall ML-702-V2 Handleiding

Marshall Monitor ML-702-V2

Lees hieronder de 📖 handleiding in het Nederlandse voor Marshall ML-702-V2 (7 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 5 personen en werd door 3 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
Broadcast A/V Division
ML-702-V2
Dual 7 3RU Rack Mount Monitor
User Manual
1
www.marshall-usa.com
Table of Contents
Product Description .........................................................................................................................2
Menu Settings ......................................................................................................................................6
Included Accessories .....................................................................................................................12
PC Set Remote Terminal Application ..................................................................................13
IMPORTANT SAFETY INSTRUCTIONS:
Please read Operating Instructions (this manual) before using the product.
Keep the manual for future reference.
Read the cautions below to prevent possible component failure or degradation.
CAUTIONS:
To avoid scratching the LCD surface, do NOT place the monitor on its face
Avoid heavy impact.
Do NOT use chemical solutions to clean this product. Simply wipe with a clean,
soft cloth to maintain the brightness of the surface.
Do NOT block vent holes. Be aware of mounting heat-producing equipment below
this product.
Use the following Instructions and Trouble-shooting Section (page 12) of the manual
to adjust the product. Internal adjustments or repairs must be performed only by
Marshall Electronics.
3
www.marshall-usa.com
Product Description
Back Panel Features
1. Push-on Power Connector
12V DC power input 5.5mm x 2.1mm push-on connector.
Plug the supplied DC power adapter here. (Center pin is +)
Important: Please connect only one type of power supply at a time to
this monitor.
2. 4-pin Power Connector
4-pin XLR DC power input compatible with typical broadcast television camera 12-volt power
supplies. CAUTION: Some 4-pin power supplies provide 24 volts. These are NOT compatible
with this monitor. Please check the label on the power supply before connecting.
Important: Please connect only one type of power supply at a time to this monitor.
Note: Power, TALLY and LAN apply to both screens. Inputs and USB service ports apply to each screen individually.
Pin number Signal
1
GND
2
No connection
3
No connection
4
+12V


Product specificaties

Merk: Marshall
Categorie: Monitor
Model: ML-702-V2

Heb je hulp nodig?

Als je hulp nodig hebt met Marshall ML-702-V2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden