Marshall AS50R Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Marshall AS50R (5 pagina's) in de categorie Gitaarversterker. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
From the Chairman
I would like to thank you personally for selecting the AS50R,
Acoustic Soloist combo.
The Marshall name has been associated with many fine products
over the years and our commitment to quality remains as constant
today as it did right back at the birth of Marshall Amplification back
in 1962.
In the case of the Acoustic Soloist, much time and research has
gone into making the sound as natural as possible. As all of my
designers are also guitarists, they fully understand the needs of the
player and bring their expertise to bear on all our products. You can
also rest assured that every Marshall amplifier has been designed
and engineered to the highest possible standards, so as a result will
stand the test of time and constant use.
I strongly suggest that you read this handbook carefully before
using your AS50R and then keep it on hand for future reference.
I am certain that you will get great enjoyment from your Marshall
Acoustic Soloist combo and wish you every success with it.
Yours Sincerely,
English
Introduction
2
English
Note: When using the Chorus, higher speed
settings usually sound better with lower depth
settings and vice versa. Experiment to find which
selection suits you best.
14.
Reverb Balance Control
Controls the balance of the Reverb effect and the
parallel effects loop between Channel 1 and
Channel 2.
15.
Reverb Level Control
Controls the overall level of the Reverb effect.
16.
Phase Switch
Switching the phase can considerably reduce the
amount of low frequency acoustic feedback.
17.
Notch Filter Switch
Further feedback reduction can be achieved using
the selectable frequency notch filter. When
activated, the filter cuts by 10dB the frequency
selected using the rotary control (item 18).
18.
Frequency Control
If feedback occurs when the Master Volume is set
to the desired performance level, select the switch
(item 17) and rotate this control until the offending
frequency is eliminated.
19.
Master Volume
Controls the overall volume output from the
amplifier.
20.
Power Switch
This is the On/Off switch for the mains power to
the amplifier. When it is switched ‘On’, the switch
will light. Please ensure the amplifier is switched
off and unplugged from the mains electricity
supply before being moved.
Rear Panel Features
1. Mains Input
Your amp is provided with a detachable mains
(power) lead that is connected here. The specific
mains input voltage rating that your amplifier has
been built for is clearly marked on the back panel.
Before connecting for the first time, please ensure
that your amplifier is compatible with your
electricity supply. If you have any doubts, please
get advice from a qualified person. Your Marshall
dealer can help you in this respect.
2. Footswitch Jack
Jack socket for connection of the optional
footswitch (model PEDL-10029) for switching the
Reverb and Chorus functions on and off.
3. Line Out Jack
Jack socket for connection to home recording or
other external equipment with jack inputs.
4. DI Out
XLR type output for connection to PA or similar
external equipment.
Note: Both the Line Out and DI out carry exactly
the same signal at different levels and both are
placed before the Master Volume so changing the
overall level of the amplifier will not affect the
signal from the DI or Line Output.
5. Effects Send Jack
Jack socket to connect to the input of an external
effects processor.
6. Effects Return Jack
Jack socket to connect to the output of an external
effects processor.


Product specificaties

Merk: Marshall
Categorie: Gitaarversterker
Model: AS50R

Heb je hulp nodig?

Als je hulp nodig hebt met Marshall AS50R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Gitaarversterker Marshall

Handleiding Gitaarversterker

Nieuwste handleidingen voor Gitaarversterker