Marshall TSL60 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Marshall TSL60 (7 pagina's) in de categorie Gitaarversterker. Deze handleiding was nuttig voor 82 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
TSL60,
TSL601 TSL602&
Valve Amplifiers
ENGLISH
1
From Jim Marshall
I would like to personally thank you for selecting one
of our valve amplifiers.JCM2000 Triple Super Lead
Since I started Marshall Amplification in 1962 I have
witnessed some incredible breakthroughs and advances
in amplifier design technology, such as master volume
amps, switchable channels, reverb, MIDI technology,
speaker emulation and digital effects processing, to
name just a few. These may seem like every day
features nowadays but this certainly wasn’t always the
case. However, the same values that were present in the
first Marshalls are still here today. That is, solid
workmanship, reliability, stylish looks and above all
great Marshall tone.
The , and TSL60 TSL601 TSL602 are our latest all valve
amplifiers and as such are really direct descendants of
our classic all valve amps. Combining all of the
aforementioned values plus a few extra attributes such
as versatility, switchable channels, reverb, a big sound
and of course, I am proud to say, all of the magical
Marshall tone that you could want. The JCM2000 range
is truly a testament to the Marshall legacy of great guitar
products.
I would like to wish you every success with all of your
musical endeavours and also your new Marshall
JCM2000 Triple Super Lead valve amplifier, which I am
sure you will find a pleasure to play for many years to
come.
Yours Sincerely,
ENGLISH
2
TSL60, TSL601 & TSL602 Front Pa
Introduction
With the introduction of the Marshall JCM2000 range of Dual and Triple Super Lead heads and combos,
from 20 watts through to 100 watts, the quintessential definition of ultimate tone and usable features has
been rewritten. This range of great amps has now been completed with the 60 watt range of Triple Super
Lead amps, the TSL60 head, the TSL601 1x12” combo, and the TSL602 2x12” combo. They will cover any
playing situation, from studio to full concert stages, whilst maintaining excellent portability.
The TSL60 range offers three channel functionality, covering Clean, Crunch, and Lead, plus all points in
between thanks to the overlapping sound spectrum of each channel. Added to that are dual reverb controls
for the long spring ‘Sound Enhancements’ Reverb, Parallel FX loop with level, and remote switching plus Mix
control, Emulated D.I. output with silent recording facility, also Deep and Presence controls. Not to mention
the unmistakable warmth and TONE of an all valve Marshall amp.
WARNING! - Important safety instructions
WARNING: This apparatus must be earthed!
A PLEASE read this instruction manual carefully before switching on.
B ALWAYS use the supplied mains lead, if a replacement is required please contact your authorised Marshall
Dealer.
C NEVER attempt to by-pass the fuses or fit ones of the incorrect value.
D DO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
E Refer all servicing to qualified service personnel including replacement of fuses and valves. Servicing is
required when the apparatus has been damaged in any way, such as when the power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been dropped.
F NEVER use an amplifier in damp or wet conditions.
No objects filled with liquids should be placed on the
apparatus. When cleaning, only use a dry cloth.
G ALWAYS unplug this apparatus during lightning storms or if unused for long periods of time.
H PROTECT the power cord from being walked on or pinched particularly at plugs, convenience receptacles and
at the point where they exit from the apparatus.
I DO NOT switch the amplifier on without the loudspeaker connected.
J ENSURE that any extension cabinets used are of the correct impedance.
➲ EUROPE ONLY - NOTE: This equipment has been tested and found to comply with the requirements of
the EMC directive (Environments E1, E2 and E3
EN 55103-1/2
) and Low Voltage directive in the E.U.
➲ EUROPE ONLY - NOTE: The Peak Inrush current for the TSL60, TSL601 & TSL602 is 33 amps.
➲ CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance may
void the user’s authority to operate the equipment.
➲ NOTE: It is recommended that all audio cables, with the exception of the speaker lead, used to connect to the
TSL60, TSL601 & TSL602 are of a high quality screened type. These should not exceed 10 metres in length.
Always use a non-screened Marshall approved speaker lead when connecting an extension cabinet to these
units.
➲ WARNING: Do not obstruct ventilation grilles and always ensure free movement of air around the amplifier!
USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A polarised plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS
KEEP THESE INSTRUCTIONS !


Product specificaties

Merk: Marshall
Categorie: Gitaarversterker
Model: TSL60

Heb je hulp nodig?

Als je hulp nodig hebt met Marshall TSL60 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Gitaarversterker Marshall

Handleiding Gitaarversterker

Nieuwste handleidingen voor Gitaarversterker