Marquant CMI-36 Handleiding

Marquant DJ Gear CMI-36

Lees hieronder de 📖 handleiding in het Nederlandse voor Marquant CMI-36 (17 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
CMI-36
USER’ MANUAL
FRONT PANEL FUNCTION
1. HEADPHONE JACKS
Use to connect for audio monitoring with headphones.
2. JOG & SHUTTLE WHEELS
Shuttle : Use the dial to select the scanning direction and speed. The disc is scanned in the forward
direction when the shuttle dial is turned clockwise from the neutral position, in the reverse direction
when the shuttle dial is turned counterclockwise. The scanning speeds up when the shuttle dial is
turned faster.
Jog : In pause mode, if you turn the jog, the point at which the sound is being produced moves by a
number of frames corresponding to the number of clicks. Clockwise moves the point forward;
counterclockwise moves the point backward. In play mode, the jog increases or decreases the speed
of the song. (clockwise : increase , counterclockwise : decrease ).
3. TIME BUTTON
Use this knob to choose the time mode : Elapsed time, remaining time or total remaining time.
4. REPEAT BUTTON
Use this button to repeat one track or all the track of the CD.
5. IN BUTTON ( LOOP SYSTEM )
This button sets the beginning of the loop. The Loop indicator on the display flashes.
6. CONT. / SINGLE BUTTON
Press these to switch between the SINGLE and CONTINUOUS play mode. The selected mode is
indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In CONTINUOUS
mode, the unit reads all track and stops.
7. PROG BUTTON
In STOP mode, you can program several tracks ( 20 tracks max. ) :
- Press the STOP button to enter in the stop mode
- Press the PROG button to enter in the program mode
- Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice.
-Use one more time the skip track buttons to choose the track you want to listen then press the PROG
button to enter your choice.
-Repeat the operation to select all the track you want to listen
-Press the play / pause button to start the playback
8. OUT BUTTON ( LOOP SYSTEM )
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
9. TARCK SELECT BUTTONS
Pressing 0-9 buttons, allow you to select tracks from the CD.
10. RELOOP BUTTON ( LOOP SYSTEM )
This button is used to start the last saved loop. To finish the loop, press the reloop button.
11. SKIP I<< BUTTON
Use this switch to re-start the track or to select the last track.
12. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
13. +10 BUTTON
Use this button to jump of 10 tracks in one press.
14. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
15. SKIP >>I BUTTON
Use this knob to select the next track.
16. PITCH CONTROL
Use this fader to increase or decrease the speed of the track.
17. PITCH BEND + BUTTON
The pitch will automatically rise when the + button is pressed and return to the original pitch when it is
released.
18. PITCH BUTTON
If you push this button, the adjustement of the pitch potentiometer is available.
19. DISPLAY
20. PITCH BEND - BUTTON
The pitch will drop while the -button is pressed and return to the original pitch when it is released.
21. EJECT BUTTON
Press to load or eject disk. Each press will open or close the disk tray.
NOTE: disc holder will not open unless stop or pause button has been pushed fir.
22. DISC-TRAY
To enter the disc, please refer to the explanations under 6.2 CD-tray.
23. SEARCH BUTTON
Pressed the button to switch the function of jog dial between SEARCH and PITCH BEND, when the
indicator LED is light, dial the jog for quick search forward and backward, when the indicator LED is
off, dial the jog for pitch bend function, lf the jog is unmoved for 8 seconds, the indicator is off, and the
jog is for pitch bend function.
24. IPOD JACK
Use to connect with the IPOD.
25. MENU BUTTON
Press to enter or exit the menu.
26. SCROLL â—„ BUTTON
Press this button to select last item of menu.
27. SCROLL â–º BUTTON
Press this button to select next item of menu.
28. REPEAT BUTTON
Press this button to repeat one track or all tracks of the IPOD. One press is single, and double is all. If
you press it three times, the track returns to normal.
29. PITCH SYSTEM

Product specificaties

Merk: Marquant
Categorie: DJ Gear
Model: CMI-36

Heb je hulp nodig?

Als je hulp nodig hebt met Marquant CMI-36 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding DJ Gear Marquant

Marquant

Marquant CMI-36 Handleiding

24 Juni 2023

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear

Line 6

Line 6 POD Express Handleiding

3 April 2024
Line 6

Line 6 POD Express Bass Handleiding

3 April 2024
IK Multimedia

IK Multimedia iRig HD X Handleiding

31 Maart 2024
Monkey Banana

Monkey Banana Junglemate Handleiding

25 Maart 2024
Chauvet

Chauvet Scorpion Dual RGB Handleiding

25 Maart 2024
Chauvet

Chauvet Wash FX Handleiding

25 Maart 2024
Chauvet

Chauvet SlimBANK T18 USB Handleiding

25 Maart 2024
Chauvet

Chauvet EZBeam Q3 ILS Handleiding

25 Maart 2024
Chauvet

Chauvet Obsession Handleiding

25 Maart 2024
Chauvet

Chauvet Gobozap Handleiding

25 Maart 2024