Makita LH1201FL Handleiding

Makita Zaagmachine LH1201FL

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita LH1201FL (20 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Table Top Miter Saw

LH1201FL

015122

ENGLISH (Original instructions)

SPECIFICATIONS

Model LH1201FL

Blade diameter 305 mm

Blade body thickness 1.9 mm or less

Hole diameter

For all countries other than European countries 25.4 mm

For European countries 30 mm

Max. Cutting capacities (H x W) with blade 305 mm in diameter in the miter saw mode

Miter angle

Bevel angle 90° 45° (left to right)

95 mm x 155 mm 95 mm x 110 mm

90° 62 mm x 200 mm 62 mm x 135 mm

64 mm x 155 mm 64 mm x 65 mm

45° 40 mm x 200 mm 40 mm x 85 mm

Max. Cutting capacities at 90° in the table saw (bench saw mode) 52 mm

No load speed (min-1) 3,800

Laser Type Red Laser 650 nm, 1 mW (Laser Class 2)

Table size (W x L) 307 mm x 465 mm

Dimensions (L x W x H) 610 mm x 535 mm x 692 mm

Net weight 20.9 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END292-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ To avoid injury from flying debris, keep

holding the saw head down, after

making cuts, until the blade has come

to a complete stop.

･

When using the tool in the miter saw mode,

secure the top table at the topmost position

so that the saw blade never protrudes from

the top surface of the top table.

･ Do not place hand or fingers close to

the blade.

･ For your safety, remove the chips, small

pieces, etc. from the table top before

operation.

･ Always set SUB-FENCE to left position

when performing left bevel cuts. Failure

to do so may cause serious injury to

operator.

･ Never look into the laser beam. Direct

laser beam may injure your eyes.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE060-1

Intended use

The tool is intended for accurate straight cutting and

(only when used as a miter saw on the lower table) miter

cutting in wood.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN61029:

Model LH1201FL 220V - 240V

Sound pressure level (L

pA) : 93 dB (A)

Sound power level (LWA) : 106 dB (A)

Uncertainty (K) : 3 dB (A)

Model LH1201FL 110V

Sound pressure level (L

pA) : 95 dB (A)

Sound power level (LWA) : 108 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENH003-15

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Table Top Miter Saw

Model No./ Type: LH1201FL

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN61029

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

31.7.2015

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA005-3

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating

a power tool.

Distractions can cause you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

10.

Use of power supply via a RCD with a rated residual

current of 30 mA or less is always recommended.

Personal safety

11.

Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

moment of inattention while operating power tools

may result in serious personal injury.

12. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

13. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

Product specificaties

Merk:	Makita
Categorie:	Zaagmachine
Model:	LH1201FL
Kleur van het product:	Black, Blue
Gewicht:	20700 g
Breedte:	476 mm
Diepte:	530 mm
Hoogte:	535 mm
Snoerlengte:	2.5 m
Stroombron:	AC
Input vermogen:	1650 W
Uitgangsvermogen:	1000 W
Stationair toerental (max):	3800 RPM
Geluidsdrukniveau:	93 dB
Onzekerheid K:	1.5 m/s²
Geluidsniveau onzekerheid:	3 dB
Vibratie emissie:	2.5 m/s²
Mes doorsnede:	305 mm
Snij-diepte (90º):	95 mm
Saw blade included:	Ja
Beschermingsklasse:	II
Snij-diepte (45º):	64 mm
Asgat:	30 mm
Mitre instelling (links):	0 °
Mitre instelling (rechts):	45 °
Afschuiningsinstelling (links):	45 °
Afschuiningsinstelling (rechts):	45 °
AC-ingangsspanning:	220 - 240 V
Type product:	Verstekzaag
Geluidsvermogensniveau:	106 dB
Snijdiepte (max):	95 mm
Diamantschijf:	Nee