Makita EX2650LH Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Makita EX2650LH (24 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/24
EX2650LH
Multi Function Power Head
EX2650LH
WARNING:
Read this instruction manual carefully before putting the Multi Function Power Head into operation and
strictly observe the safety regulations!
Save instruction manual for future reference.
INSTRUCTION MANUAL
2
Thank you very much for purchasing the MAKITA Multi Function Power Head.
We are pleased to recommend to you the MAKITA Multi Function Power Head
which is the result of a long development programme and many years of
knowledge and experience.
Please read this booklet which refers in detail to the various points that will
demonstrate its outstanding performance. This will assist you to obtain the best
possible result from your MAKITA Multi Function Power Head.
You will note the following symbols when reading the instructions manual.
Read instruction manual and follow the
warnings and safety precautions!
Wear protective helmet, eye and ear
protection!
Take particular care and attention! Fuel (Gasoline)
Forbidden! Engine-manual start
No smoking! Emergency stop
No open ame! First aid
Protective gloves must be worn! ON/START
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended! OFF/STOP
Keep the area of operation clear of all
persons and pets!
English
(Original instructions)
Table of Contents Page
Symbols .........................................................................2
Safety instructions .........................................................3
Technical data................................................................6
Approved attachments...................................................7
Designation of parts.......................................................8
Mounting of handle ........................................................9
Mounting attachment .....................................................9
Disassembling .............................................................10
Before start of operation .............................................. 11
Correct handling of machine........................................13
Points in operation and how to stop ............................13
Servicing instructions...................................................16
Storage ........................................................................19
3
General instructions
To ensure correct operation, user has to read this instruction manual to make -
himself familiar with the handling of the Multi Function Power Head. Users
insufî‚¿ciently informed will risk danger to themselves as well as others due to
improper handling.
It is recommended only to lend the Multi Function Power Head to people who -
have proven to be experienced with Multi Function Power Heads.
Always hand over the instruction manual.
First users should ask the dealer for basic instructions to familiarize oneself -
with the handling of an engine powered cutter.
Children and young persons aged under 18 years must not be allowed to -
operate the Multi Function Power Head. Persons over the age of 16 years
may however use the device for the purpose of being trained only whilst
under supervision of a qualiî‚¿ed trainer.
Use Multi Function Power Heads with the utmost care and attention. -
Operate the Multi Function Power Head only if you are in good physical -
condition. Perform all work calmly and carefully. The user has to accept
liability for others.
Never use the Multi Function Power Head after consumption of alcohol or -
drugs, or if feeling tired or ill.
National regulation can restrict the use of the machine. -
Personal protective equipment
The clothing worn should be functional and appropriate, i.e. it should be tight- -
î‚¿tting but not cause hindrance. Do not wear either jewelry or clothing which
could become entangled with bushes or shrubs.
In order to avoid either head-, eye-, hand-or foot injuries as well as to protect -
your hearing the following protective equipment and protective clothing must
be used during operation of the Multi Function Power Head.
Always wear a helmet where there is a risk of falling objects. The protective -
helmet (1) is to be checked at regular intervals for damage and is to be
replaced at the latest after 5 years. Use only approved protective helmets.
The visor (2) of the helmet (or alternatively goggles) protects the face from -
ying debris and stones. During operation of the Multi Function Power Head
always wear goggles, or a visor to prevent eye injuries.
Wear adequate noise protection equipment to avoid hearing impairment (ear -
muffs (3), ear plugs etc.).
The work overalls (4) protect against ying stones and debris. -
We strongly recommend that the user wears work overalls.
Special gloves (5) made of thick leather are part of the prescribed equipment -
and must always be worn during operation of the Multi Function Power Head.
When using the Multi Function Power Head, always wear sturdy shoes (6) -
with a non-slip sole. This protects against injuries and ensures a good footing.
Starting up the Multi Function Power Head
Please make sure that there are no children or other people, also pay -
attention to any animals in the working vicinity.
Make sure that the attachment is attached in place, the control lever for easy -
action and check for proper functioning of the lock-off lever.
Motion of the attachment during idling speed is not allowed. Check with your -
dealer for adjustment if in doubt. Check for clean and dry handles and test
the function of the start/stop switch.
15 Meters
Diagrammatic î‚¿gure
Intended use of the machine
This multi function power head is intended for driving an approved attachment
listed in this instruction manual. Never use the machine for the other purpose.
Product specificaties
| Merk: | Makita |
| Categorie: | Multitool |
| Model: | EX2650LH |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita EX2650LH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Multitool Makita
21 Juni 2023
27 Mei 2023
19 Mei 2023
10 Mei 2023
8 Mei 2023
5 Mei 2023
4 Mei 2023
25 April 2023
19 April 2023
18 April 2023
Handleiding Multitool
- Multitool Bosch
- Multitool AEG
- Multitool DeWalt
- Multitool Bavaria
- Multitool Dremel
- Multitool Einhell
- Multitool Extech
- Multitool Fein
- Multitool Ferm
- Multitool Festool
- Multitool Gamma
- Multitool Gude
- Multitool Hama
- Multitool Hikoki
- Multitool Kress
- Multitool Metabo
- Multitool Milwaukee
- Multitool Parkside
- Multitool Powerfix
- Multitool Powerplus
- Multitool Renovator
- Multitool Robust
- Multitool Rocktrail
- Multitool Ryobi
- Multitool Silvercrest
- Multitool Silverline
- Multitool Skil
- Multitool Stiga
- Multitool Taurus
- Multitool Toolcraft
- Multitool Topcraft
- Multitool Trotec
- Multitool Varo
- Multitool Vonroc
- Multitool Westfalia
- Multitool Worx
- Multitool Ozito
- Multitool Black And Decker
- Multitool Cocraft
- Multitool Meec Tools
- Multitool Cotech
- Multitool Fieldmann
- Multitool Lezyne
- Multitool Proxxon
- Multitool Porter-Cable
- Multitool EGO
- Multitool Leatherman
- Multitool Dedra
- Multitool Graphite
- Multitool RIDGID
- Multitool Craftsman
- Multitool G-Technology
- Multitool SKS
- Multitool Baumr-AG
- Multitool MTM
- Multitool Meister Craft
- Multitool McKenzie
- Multitool Ergotools Pattfield
- Multitool CMT Orange Tools
- Multitool Donau Elektronik
Nieuwste handleidingen voor Multitool
17 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
8 April 2024
19 Maart 2024
16 Maart 2024