Makita EK7301 Handleiding

Makita Snijmachine EK7301

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita EK7301 (56 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56

Important:

Read this instruction manual carefully before putting the Power Cut into operation and strictly observe the

safety regulations!

Keep this instruction manual!

Instruction Manual

Original Instruction Manual

EK7300

EK7301

Table of contents Page

Packing ................................................................................ 2

Delivery inventory .............................................................. 3

Symbols ...............................................................................3

SAFETY PRECAUTIONS

Intended use ................................................................... 4

General precautions ....................................................... 4

Protective equipment ...................................................4-5

Fuels / Refuelling ............................................................5

Putting into operation ...................................................... 5

Cutting discs ................................................................... 6

Kickback and lock-in ....................................................... 7

Working behavior / Method of working ............................ 7

Always observe the following when using

synthetic resin cutting discs ............................................. 8

Cutting metal ...................................................................8

Cutting masonry and concrete .....................................8-9

Transport and storage ..................................................... 9

Maintenance ................................................................. 10

First aid ......................................................................... 10

Disposal and environmental protection .........................10

Technical data ................................................................... 11

Denomination of components ......................................... 12

PUTTING INTO OPERATION

Mounting the cutting disc ............................................... 13

Tightening the V-belt / Checking V-belt tension ............ 14

Fuels / Refuelling .....................................................14-15

Starting the engine ........................................................16

Cold-starting .................................................................17

Warm-starting ............................................................... 17

Stop engine ...................................................................17

Adjusting the carburetor .................................................. 18

MAINTENANCE

Changing the V-belt ...................................................... 19

Cleaning the protection hood ........................................ 20

Cleaning / changing the air Þ lter ..............................20-21

Replacing the spark plug .............................................. 22

Replacing the suction head ..........................................22

Replacing the starter cable ........................................... 23

Replacing the return spring ...........................................24

Replacing / cleaning the spark arrester screen .............26

Instructions for periodic maintenance ........................... 28

Cutting attachment in central / side position ................. 25

Repositioning the cutting attachment ....................... 25-26

SPECIAL ACCESSORIES

Diamond cutting discs, trolley, water tank

and pressure water system ............................................27

Service, spare parts and guarantee ................................ 28

Troubleshooting ...............................................................29

Extract from spare parts list .......................................30-31

Accessories ..................................................................31

Packing

Your MAKITA Power Cut is packed in a cardboard box to pr e-

vent shipping damage.

Cardboard is a basic raw material and is consequently reuseable

or suitable for recycling (waste paper recycling).

Thank you for purchasing a MAKITA product!

Congratulations on choosing a MAKITA Power Cut cutoff saw!

We are conÞ dent that you will be satisÞ ed with this modern

piece of equipment. Like our chain saws, the MAKITA Power

Cuts feature specially designed high-performance engines

with outstanding power-to-weight ratios, for heavy-duty yet

lightweight tools.

Other advantages of the MAKITA Power Cuts:

• Sturdy construction and high reliability.

• Maintenance-free electronic ignition, hermetically sealed to

protect against dust and moisture.

• Vibration damping with the MAKITA 2-mass system (D2M) for

tireless working even when guiding the Power Cut by hand.

• Five-stage air-Þ lter system for reliable working even under

very dusty conditions.

• Two options for mounting the cutter attachment: Either cen-

trally, for good balance when guiding the unit manually, or on

the side, for ß ush cuts along walls or curbsides or horizontally

directly above the ground.

• Extensive range of resin-bonded and diamond grit cutting

discs, trolley with dust catcher, and systems for supplying

water to the disc.

The following industrial property rights apply: US 08510690,

SE 95027298, SE 95027306, IT 95000653, IT 95000654, GBM

9412558, GBM 9412559.

We want you to be satisÞ ed with your MAKITA product.

In order to guarantee the optimal function and performance of

your Power Cut and to ensure your personal safety we would

request you to perform the following:

Read this instruction manual carefully before putting the

Power Cut into operation for the Þ rst time, and strictly

observe the safety regulations! Failure to observe these

precautions can lead to severe injury or death!

EU Conformity Declaration

The undersigned, Tom as authorized by oyasu Kato, MAKITA

Corporation, declare that the MAKITA machines,

Type: (395)

Power Cut EK7300, EK7301

manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho,

Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and

health requirements of the applicable EU Directives:

EU Machinery Directive 2006/42/EG, EU EMC Directive

2004/108/ EG, Outdoor Noise Directive 2000/14/EG.

The most important standards applied to properly meet the re-

quirements of the above EU Directive were: EN 19432, CISPR

12, EN ISO 14982, DIN EN 61000-4. The conformity assess-

ment procedure 2000/14/EG was performed per Annex V. The

measured noise level (Lwa) is 114 dB(A). The guaranteed noise

level (Ld) is 115 dB(A).

The technical documentation is on Þ le at MAKITA International

Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks,

MK15 8JD, England.

Anjo, 4.12.2011 for MAKITA Corporation

Tomoyasu Kato

Managing Director

6 5 4 3 2 1

Delivery inventory

1. Power Cut

2. Cutting disc (not in the general scope of delivery. Country-speciÞ c)

3. Adapter ring 20/25.4 (not in the general scope of delivery. Country-speciÞ c)

4. Screwdriver (for carburetor adjustment)

5. Offset screwdriver

6. Universal wrench 13/19

7. Instruction manual (not shown)

Symbols

You will notice the following symbols on the Power Cut and in the Instruction Manual:

In case one of the parts listed should not be included in the

delivery inventory, please consult your sales agent.

Read instruction manual and

follow the warning- and safety

precautions!

Particular care and caution!

Forbidden!

Wear helmet and eye, respiratory

and hearing protection!

Wear protective gloves!

Wear respiratory protection!

Hazardous dust and/or

gas emission!

Fire hazard from ß ying sparks!

No smoking!

No open Þ re!

Direction of cutting wheel rotation

Warning: the max. peripheral

speed of the cutting disc is 80 m/s!

Cutting disc dimensions

Never use circular saw blades!

Combination switch

Choke, Start/Stop (I/O)

Starting procedure

(Press decompression valve,

Engine - manual start)

Stop engine!

Warning!

Kickback!

Fuel and oil mixture

First aid

Recycling

CE - Marking

Product specificaties

Merk:	Makita
Categorie:	Snijmachine
Model:	EK7301
Kleur van het product:	Black, Blue
Gewicht:	10000 g
Breedte:	290 mm
Diepte:	770 mm
Hoogte:	370 mm
Stroombron:	Benzine
Stationair toerental (max):	4300 RPM
Maximum koppel:	4.3 Nm
Geluidsdrukniveau:	99.6 dB
Stationair toerental (min):	4300 RPM
Vibratie emissie:	7 m/s²
Mes doorsnede:	350 mm
Snij-diepte (90º):	122 mm
Aantal luchtfilterstadia:	5
Asgat:	25.4 mm
Type motor:	Tweetaktmotor
Geluidsvermogensniveau:	109 dB
Motorvermogen:	5.2 hp
Snijdiepte (max):	122 mm
Capaciteit brandstoftank:	1.1 l
Cilinderinhoud:	73 cm³
Maximale snelheid:	80 m/s
Aantal takten motor:	2
Antivibratiesysteem:	Ja
Nominaal motorvermogen:	3.8 kW
Mengverhouding (brandstof:olie):	50:1
Diameter schacht:	25.4 mm