Makita BUH521RF Handleiding

Makita Heggenschaar BUH521RF

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita BUH521RF (16 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Hedge Trimmer
BUH481
BUH483
BUH521
BUH523
012444
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BUH481 BUH483 BUH521 BUH523
Blade length 480 mm 520 mm
Strokes per minute (min
-1
)
1,350
Rated voltage D.C. 14.4 V D.C. 18 V D.C. 14.4 V D.C. 18 V
Overall length 869 mm 881 mm 873 mm 888 mm 919 mm 931 mm 923 mm 938 mm
Net weight 3.0 kg 3.1 kg 3.0 kg 3.2 kg 3.0 kg 3.2 kg 3.1 kg 3.3 kg
Battery cartridge BL1415 BL1430 BL1815 BL1830 BL1415 BL1430 BL1815 BL1830
Battery charger DC18RC,DC18SD
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END013-3
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ Do not expose to rain.
ï½¥ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE014-1
Intended use
The tool is intended for trimming hedges.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model BUH481,BUH483,BUH521
Sound pressure level (L
pA) : 75 dB(A)
Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB (A).
Model BUH523
Sound pressure level (L
pA) : 77 dB(A)
Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : hedge trimming
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Cd
Ni-MH
Li-ion
3
ENH040-2
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Hedge Trimmer
Model No./ Type:
BUH481,BUH483,BUH521,BUH523
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
Model BUH481
Measured Sound Power Level: 83.2dB (A)
Guaranteed Sound Power Level: 86dB (A)
Model BUH483
Measured Sound Power Level: 83.8dB (A)
Guaranteed Sound Power Level: 88dB (A)
Model BUH521
Measured Sound Power Level: 82.9dB (A)
Guaranteed Sound Power Level: 86dB (A)
Model BUH523
Measured Sound Power Level: 84.3dB (A)
Guaranteed Sound Power Level: 89dB (A)
27.6.2011
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or


Product specificaties

Merk: Makita
Categorie: Heggenschaar
Model: BUH521RF

Heb je hulp nodig?

Als je hulp nodig hebt met Makita BUH521RF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heggenschaar Makita

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar