Makita UH200DWX Handleiding

Makita Heggenschaar UH200DWX

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita UH200DWX (8 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 79 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Model No.

Description

PRODUCT

CONCEPT AND MAIN APPLICATIONS

P 1/ 8

UH200D (HU01*)

Cordless Hedge Trimmer 200mm (7-7/8)

Model UH200D is 200mm Cordless hedge trimmer

Its main features are:

Lightweight and compact design for easy handling

Optional Grass shear blade kit can convert this model

into Model UM164D Cordless grass shear.

This product is available in the following variations.

All models also include the accessories listed in "Standard equipment".

Model No. type quantity Charger

UH200DW BL1013

(Li-ion 1.3Ah) DC10WA

UH200DWE 2

Battery

UH200DZ No No

Specification

Standard equipment

Optional accessories

Note: The standard equipment for the tool shown above may differ by country.

Chip receiver ..................................................... 1

Blade cover ........................................................ 1

Battery

Specification

Weight according to

EPTA-Procedure 01/2003 : kg (lbs)*4

Capacity: Ah

Cell

Voltage: V

No load speed: min =spm-1 *2

*2 spm= stroke per minute

*3: Indicates maximum diameter of the branch that can be received

between adjacent two blade teeth. (See the figure on right.)

*4 with hedge trimmer blade, chip receiver

Model

Overload protection

1.2 (2.7)

10.8

1.3

Li-ion

1,250

UH200D

Yes

*1 without chip receiver

TECHNICAL INFORMATION

Dimensions : mm (")*1

Width (W)

Height (H)

Length (L) 460 (18-1/8)

120 (4-3/4)

130 (5-1/8)

Blade length: mm (") 200 (7-7/8)

Tooth spacing: mm (") 26 (1)

Maximum branch

diameter : mm (")*3 8 (5/16)

Battery BL1013

Charger DC10WA

Grass shear blade kit (*5with a bottle of lubricant grease)

Hedge trimmer blade kit (*6with a bottle of lubricant grease)

Extension handle kit*5

Chip receiver set*6

Accessory kit for use as a hedge trimmer*6 (including Blade cover, etc.)

Accessory kit for use as a grass shear*5 (including Base frame, etc.)

*5 for use as a grass shear

*6 for use as a hedge trimmer

*1: Model number for North and Central American countries

P 2 8/

Repair

CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.

[1] LUBRICATIONS

Fig. 1

Item No.

Apply the following lubricant to protect parts and product from unusual abrasion.

Description

Crank

Helical gear 47

Housing complete (L)

Gear 12-31 Gear teeth with which Helical gear 47 and DC motor

gear engage

Drum portions where Blade contact

17 Pin 6 (with notch) Drum portion for smooth rotation of Helical gear 47

18 24 26 Washer 6 Whole portion

a little

Lubricant AmountPortion to lubricate

Pin 6

1.5g

a little

Makita grease N No.2

Molybdenum disulfide

Drum portion for smooth rotation of 25 Gear 12-31

Makita grease N No.2

Shear blade assembly

P 3 8/

Fig. 2

Repair

[2] DISASSEMBLY/ASSEMBLY

[2]-1. Gear 12-31, Helical gear 47

DISASSEMBLING

(1) Remove Blade, Crank and Housing set (R) as illustrated in .Fig. 2

3. Loosen two M4 Countersunk

head screws, and then remove

Shear blade assembly.

Under cover

complete

4. Remove Crank complete and Dust guard.

Dust guard

2. Remove Under cover complete.

Shear blade

assembly

M4 Countersunk head screw

Crank complete

Lock lever

Under cover

complete

1. With pressing Lock lever, turn Under cover complete

to the unlocked position as drawn below.

Unlocked position

Set plate

5. Remove Set plate with slotted screwdriver. 6. Separate Housing set (R) by unscrewing five 3x16 Tapping screws.

Fig. 3

Helical gear 47

1. Remove Helical gear 47 and Gear 12-31 from Housing set (L). 2. After removing Washer 6 and Pin 6 which

functions as a shaft for the Helical gear 47,

remove 2 pcs. of Pin 4 by pressing with

Arbor press. Helical gear 47 can be replaced.

Gear 12-31

Pin 6 (with a notch)

Washer 6

Arbor press

(2) After removing Housing set (R), Helical gear 47 and Gear 12-31 can be removed. ( )Fig. 3

Helical gear 47

Housing set (L) Pin 4

(2pcs.)

Housing set (R)

Housing set (L)

3x16 Tapping screw

(5pcs.)

Product specificaties

Merk:	Makita
Categorie:	Heggenschaar
Model:	UH200DWX
Gewicht:	1200 g
Diepte:	460 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	10.8 V
Stationair toerental:	1250 RPM
Lemmetlengte:	200 mm
Bladtype:	Enkel blad
Snijdikte (max):	8 mm
Bladtand afstand:	26 mm