Mackie XR624 Handleiding

Mackie Speaker XR624

Lees hieronder de 📖 handleiding in het Nederlandse voor Mackie XR624 (16 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

O W N E R ’ S M A N U A L

Professional Studio Monitors

XR624 & XR824

XR SERIES MONITORS

XR Series Monitors

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding-type

plug has two blades and a third grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug does not ﬁt into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table speciﬁed

by the manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

15. This apparatus shall not be exposed to dripping or splashing, and no object ﬁlled

with liquids, such as vases or beer glasses, shall be placed on the apparatus.

16. Do not overload wall outlets and extension cords as this can result in a risk of ﬁre

or electric shock.

17. This apparatus has been designed with Class-I construction and must be

connected to a mains socket outlet with a protective earthing connection

(the third grounding prong).

18. This apparatus has been equipped with a rocker-style AC mains power switch. This

switch is located on the rear panel and should remain readily accessible to the user.

19. The MAINS plug or an appliance coupler is used as the disconnect device,

so the disconnect device shall remain readily operable.

PORTABLE CART

WARNING

CAUTION

The lightning ﬂash with arrowhead symbol within

an equilateral triangle is intended to alert the user

to the prescence of uninsulated “dangerous voltage”

within the product’s enclosure, that may be of signiﬁcant ma-

gnitude to constitute a risk of electric shock to persons.

RISK OF ELECTRIC SHOCK! DO NOT OPEN!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

The exclamation point within an equilateral triangle is

intended to alert the user of the prescence of important

operating and maintaining (servicing) instructions in the

literature accompanying the appliance.

20. NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modiﬁcations to this device not expressly approved by

LOUD Technologies Inc. could void the user's authority to operate the equipment

under FCC rules.

21. This apparatus does not exceed the Class A/Class B (whichever is applicable)

limits for radio noise emissions from digital apparatus as set out in the radio

interference regulations of the Canadian Department of Communications.

ATTENTION — Le présent appareil numérique n’émet pas de bruits

radioélectriques dépassant las limites applicables aux appareils numériques de

class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage

radioélectrique édicté par les ministere des communications du Canada.

22. Exposure to extremely high noise levels may cause permanent hearing loss.

Individuals vary considerably in susceptibility to noise-induced hearing loss, but

nearly everyone will lose some hearing if exposed to sufﬁciently intense noise

for a period of time. The U.S. Government’s Occupational Safety and Health

Administration (OSHA) has speciﬁed the permissible noise level exposures shown

in the following chart.

According to OSHA, any exposure in excess of these permissible limits could result

in some hearing loss. To ensure against potentially dangerous exposure to high

sound pressure levels, it is recommended that all persons exposed to equipment

capable of producing high sound pressure levels use hearing protectors while the

equipment is in operation. Ear plugs or protectors in the ear canals or over the

ears must be worn when operating the equipment in order to prevent permanent

hearing loss if exposure is in excess of the limits set forth here:

8 90 Duo in small club

6 92

4 95 Subway Train

3 97

2 100 Very loud classical music

1.5 102

1 105 Jon screaming at Karl about deadlines

0.5 110

0.25 or less 115 Loudest parts at a rock concert

WARNING — To reduce the risk of ﬁre or electric

shock, do not expose this apparatus to rain or moisture.

Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.

Apparatet må tilkoples jordet stikkontakt.

Apparaten skall anslutas till jordat uttag.

Part No. SW1177 Rev. A 06/16

Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS ...............................................2

INTRODUCTION ...............................................................................

QUICK START ........................................................................... 5

HOOKUP DIAGRAMS...............................................................6

REAR PANEL DESCRIPTION .............................................................7

1. POWER CONNECTOR .......................................................7

2. POWER SWITCH ..............................................................7

3. AC SELECT SWITCH ........................................................... 7

4. SIGNAL INPUTS ................................................................ 7

5. INPUT SENSITIVITY ..........................................................8

6. ACOUSTIC SPACE..............................................................8

7. LOW FREQUENCY FILTER .................................................. 8

8. HIGH FREQUENCY FILTER .................................................8

9. POWER MODE .................................................................9

10. CUSTOM-TUNED REAR PORT .........................................9

FRONT PANEL DESCRIPTION ............................................................ 9

11. POWER/OVERLOAD LED ..............................................9

PROTECTION CIRCUITS ..................................................................

OVEREXCURSION PROTECTION .........................................

THERMAL PROTECTION ......................................................

INTEGRATED MAGNETIC SHIELDING ...................................

OVERLOAD PROTECTION ...................................................

INPUT SIGNAL WIRING ......................................................

CARE AND CLEANING ....................................................................

APPENDIX A: SERVICE INFO ..........................................................

TROUBLESHOOTING 11 ...........................................................

REPAIR 12 ...............................................................................

APPENDIX B: TECHNICAL INFORMATION .......................................

XR SERIES SPECIFICATIONS ...................................................

XR SERIES DIMENSIONS ........................................................

XR SERIES LIMITED WARRANTY ....................................................

Contents XR Series Features

•

Professional level performance

•

Logarithmic waveguide provides acoustic

alignment for balanced sound across the entire

frequency spectrum

•

ELP™ Bass Reﬂ ex System engineered for zero

turbulence, providing greatly increased output

capability and extended low-frequency response

•

1” black anodized aluminum tweeter reveals the

ﬁ nest details and upper harmonics of your mix.

•

6.5" (XR624) or 8" (XR824) Kevlar® woofer

offers fast transient recovery for incredibly

accurate low frequency response

•

160W bi-ampliﬁ ed Class-D ampliﬁ cation

(100LF / 60HF)

•

Frequency response: 45Hz – 22kHz (XR624)

or 36Hz – 22kHz (XR824)

• Optimize XR monitors for your sound and mixing

environment

•

Adjustable acoustic space ﬁ lters maintain ﬂ at

response in typical placement

•

HF ﬁ lter applies boost or cut to compensate for

particularly dull or bright sounding rooms

•

LF ﬁ lter rolls off the low end to simulate smaller

speakers for reference

• Attention to the detail

•

Eco-friendly auto turn-off / turn-on

•

Black wood grain ﬁ nish for a classic studio feel

•

Specially designed internal bracing adds stiffness

for reduced distortion and enhanced clarity

•

Included custom acoustic isolation pad reduces

unwanted resonance and improves bass response

Like us

Watch our dang videos

Please write your serial number here for future

reference (i.e., insurance claims, tech support,

return authorization, make dad proud, etc.)

Purchased at:

Date of purchase:

Product specificaties

Merk:	Mackie
Categorie:	Speaker
Model:	XR624
Kleur van het product:	Zwart
Gewicht:	6700 g
Breedte:	211 mm
Diepte:	257 mm
Hoogte:	333 mm
Materiaal behuizing:	MDF
Bluetooth:	Nee
Stroom:	16 A
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC
Gemiddeld vermogen:	160 W
Stroomverbruik (in standby):	0.5 W
Versterker output power:	160 W
Ingang stroom:	Ja
Aanbevolen gebruik:	Studio
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Aantal drivers:	2
Woofer:	Ja
Frequentiebereik:	45 - 22000 Hz
Luidspreker soort:	2-weg
Versterker:	Ingebouwd
Diameter woofer:	165 mm
Aantal woofer drivers:	1
Diameter hogetonenluidspreker:	25 mm
Aantal tweeter drivers:	1
XLR in:	Ja
Regeling van bass-niveau:	Ja
Tweeter:	Ja
AC-ingangsspanning:	100 - 120/220 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Stroomverbruik (typisch):	150 W
Crossover frequentie:	2700 Hz
Versterker klasse:	D
Ingang van 6,35 mm (1/4-inch):	1