Mackie PPM608 Handleiding

Mackie Mengpaneel PPM608

Lees hieronder de 📖 handleiding in het Nederlandse voor Mackie PPM608 (32 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32

PPM608

O W N E R ’ S M A N U A L

8-Channel, 2 x 500 W Professional Powered Mixer

PPM608

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11.

Only use attachments/accessories speciﬁed by the manufacturer.

12.

Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

14.

Refer all servicing to qualiﬁed service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15.

Do not overload wall outlets and extension cords as this can result in a

risk of ﬁre or electric shock.

16.

This apparatus shall not be exposed to dripping or splashing, and no

object ﬁlled with liquids, such as vases or beer glasses, shall be placed

on the apparatus.

17.

This apparatus has been designed with Class-I construction and must

be connected to a mains socket outlet with a protective earthing

connection (the third grounding prong).

18.

This apparatus has been equipped with an all-pole, rocker-style AC

mains power switch. This switch is located on the rear panel and

should remain readily accessible to the user.

19. NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandthe

receiver.

• Connecttheequipmentintoanoutletonacircuitdifferentfrom

that to which the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianfor

help.

CAUTION: Changes or modiﬁcations to this device not expressly

approved by LOUD Technologies Inc. could void the user's authority to

operate the equipment under FCC rules.

20.

This apparatus does not exceed the Class A/Class B (whichever is

applicable)

limits for radio noise emissions from digital apparatus as

set out in the radio interference regulations of the Canadian Department

of Communications.

ATTENTION — Le présent appareil numérique n’émet pas de bruits

radioélectriques dépassant las limites applicables aux appareils

numériques de class A/de class B (selon le cas) prescrites dans le

réglement sur le brouillage radioélectrique édicté par les ministere des

communications du Canada.

21.

Exposure to extremely high noise levels may cause permanent hearing

loss. Individuals vary considerably in susceptibility to noise-induced

hearing loss, but nearly everyone will lose some hearing if exposed to

sufﬁciently intense noise for a period of time. The U.S. Government’s

Occupational Safety and Health Administration (OSHA) has speciﬁed

the permissible noise level exposures shown in the following chart.

According to OSHA, any exposure in excess of these permissible limits

could result in some hearing loss. To ensure against potentially

dangerous exposure to high sound pressure levels, it is recommended

that all persons exposed to equipment capable of producing high

sound pressure levels use hearing protectors while the equipment

is in operation. Ear plugs or protectors in the ear canals or over the

ears must be worn when operating the equipment in order to prevent

permanent hearing loss if exposure is in excess of the limits set forth

here:

Important Safety Instructions

CAUTION AVIS

RISK OF ELECTRIC . DO NOT OPENSHOCK

RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR

CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)TO

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNELTO

ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.

AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.

CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ S CET TICLE PA AR

A A LA PLUIE OU L'HUMIDITE

The lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure, that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral

est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de

"voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque

d'éléctrocution.

The exclamation point within an equilateral triangle is intended to alert the

user of the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé

pour alerter les utilisateurs de la présence d'instructions importantes pour le

fonctionnement et l'entretien (service) dans le livret d'instruction

accompagnant l'appareil. WARNING — To reduce the risk of ﬁre or electric shock, do not

expose this apparatus to rain or moisture.

Duration,

per day in

hours

Sound Level

dBA, Slow

Response

Typical Example

8 90 Duo in small club

6 92

4 95 Subway Train

3 97

2 100 Veryloudclassicalmusic

1.5 102

1 105 Greg and Ben screaming at Troy

about deadlines

0.5 110

0.25 or less 115 Loudest parts at a rock concert

PORTABLE CART

WARNING

Owner’s Manual

Part No. SW0681 Rev. F 09.2011

Loosely based on a dream sequence in which the entire Mackie marketing

department tap-dance their way into downtown Woodinville for lunch.

Ready, steady, go!

1. Turn the channel level, mon 1, and FX/mon 2

controls fully down.

2. Turn down the compressor controls (ch. 1–4).

3. Set all the EQ controls to the center, including

the graphic EQ sliders.

4. Turn down the main level and monitor 1 level

controls, and turn on the powered mixer.

5. For each channel, press the gain switch in (low

gain) if you are using a line-level source. Press

it out (high gain) if you are using a microphone

or other low-level source.

6. For condenser mics, push in the phantom

power switch. If you are using both condenser

and dynamic mics, don’t worry. Phantom power

will not hurt most dynamic mics. Check the

micro phone’s user manual if you’re not sure.

7. Play something into an input at real-world

levels, and turn up the channel level to

U (unity).

8. In normal playing, the channel's OL LED should

only light occasionally. If it stays on for a large

portion of your performance, check that the

gain switch is set correctly.

9. Slowly turn up the main level control until you

hear the signal in your speakers.

10. Repeat steps 5 to 8 for the remaining channels.

11. If needed, apply some EQ wisely.

12. Adjust the levels to get the best mix. Keep the

level controls fully down on unused channels.

Other Notes

• Onlyconnectthepoweredmixer'sspeaker-level

outputs to passive loudspeakers.

• Whenshuttingdown,turnoffanyexternal

ampliﬁers or powered loudspeakers ﬁrst.

When powering up, turn on any external

ampliﬁers or powered loudspeakers last.

• Savetheshippingbox!

Read This Page!

We realize that you must be really keen

to try out your new powered mixer, but

please read the safety instructions on

page 2, and this page ﬁrst.

Setup

The PPM608 powered mixer is designed for ease of

operation, and to be set up quickly and easily.

Place the powered mixer in a position where it is easy

to reach the controls. All the controls and input

connection points are located on the front panel so you

can make quick adjustments and connections on stage.

Make sure there is at least 6 inches of airspace behind

the powered mixer for ventilation. There are two fans

inside the cabinet to cool the power ampliﬁer section.

Use the powered mixers in a nice clean and dry

environment, free from dryer lint and dust bunnies.

Connections

1. Be sure the rear-panel power switch is off

before making any connections.

2. Push the line cord securely into the IEC

connector on the rear panel, and plug the

other end into a 3-prong AC outlet that is

properly conﬁgured for the voltage of your

powered mixer.

3. Plug a balanced microphone into one of the

mic XLR (3-pin) connectors on the front panel.

Or you can connect any line-level signal

(keyboard, or guitar preamp) to a line input

jack using a TS or a TRS 1/4" plug.

4. You can connect a guitar directly to inputs 5 or

6 without need for a DI box, if you press the

hi-z switch on these channels.

5. The insert jacks are used if you want to connect

an external effects or dynamics processor into

the signal chain. See page 13 for more details.

6. Plug the speakers (4 ohms or greater) into the

speaker output jacks on the rear panel. If you

plug two speakers into a side, each speaker

must be 8 ohms or greater to maintain a 4-ohm

minimum load on the ampliﬁer. Use at least

18 gauge speaker cable with 1/4" TS plugs or

Speakon® plugs. For now, set the rear panel

power amp mode switch to stereo mains.

Don’tuseguitarcordsforspeakercables!

They’re not designed to handle speaker-level

signals and could overheat.

Please write your serial number here for future

reference (i.e., insurance claims, tech support,

return authorization, make dad proud, etc.)

Purchased at:

Date of purchase:

Product specificaties

Merk:	Mackie
Categorie:	Mengpaneel
Model:	PPM608

Heb je hulp nodig?

Als je hulp nodig hebt met Mackie PPM608 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Mengpaneel Mackie

Mackie DLZ Creator Handleiding

27 Juni 2023

Mackie ProFX6v3 Handleiding

5 Mei 2023

Mackie Onyx 16 Handleiding

3 Mei 2023

Mackie ProFX8 Handleiding

1 Mei 2023

Mackie 3204VLZ4 Handleiding

28 April 2023

Mackie 802VLZ4 Handleiding

17 April 2023

Mackie 1202VLZ4 Handleiding

6 April 2023

Mackie 1604-VLZ Handleiding

30 Maart 2023

Mackie 402VLZ4 Handleiding

23 Maart 2023

Mackie ProFX22v2 Handleiding

18 Maart 2023

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel

Power Dynamics PDM-Y801 Handleiding

15 April 2024

Power Dynamics PDSM100 Handleiding

15 April 2024

Vonyx VM-KG08 Handleiding

15 April 2024

Power Dynamics PDM-T1204 Handleiding

15 April 2024

Omnitronic TRM-222 Handleiding

10 April 2024

DAP Audio GIG-143TAB Handleiding

9 April 2024

DAP Audio MP3 USB record module Handleiding

9 April 2024

Russound XZone70V Handleiding

6 April 2024

Cloud MPA240 Handleiding

19 Maart 2024

Cloud MX141M Handleiding

19 Maart 2024