M-Locks EK5045 Handleiding

Bekijk gratis de handleiding van M-Locks EK5045 (1 pagina’s), behorend tot de categorie Fűtőpárna. Deze gids werd als nuttig beoordeeld door 33 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over M-Locks EK5045 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

M-LOCKS BV Tel: +31 (0)314 376 876

Vlijtstraat 40 ver 1.1 2013 03 29 Fax: +31 (0)314 376 878

NL-7005 BN Doetinchem 1 www.m-locks.com

Technical manual

EK5020

(ABS*-housing chrome)

EK5040

(metal housing chrome)

EK5025

(ABS*-housing chrome, vertical)

EK5045

(metal housing chrome, vertical)

EK5090

(metal housing brass)

CHARACTERISTICS

The housing of the EuroClass entry unit combines an alpha-numeric membrane keypad with a pivot

handle. The 8x8 mm square shaft of the pull handle drives either the lock or a boltwork. The

integrated battery compartment opens with a slider and is located in the bottom of the unit. Cable

length is approximately 30cm.

DIMENSIONS / MOUNTING INSTRUCTION

The cable should be routed through a separate cable hole. The diameter of the cable hole should be

minimum 9mm, maximum 12mm. The spindle hole should be maximum Ø: 13mm. Both holes must

be de-burred well to avoid damage.

Cut the 8mm square shaft to an appropriate length. Make sure the shaft drives extends into lock or

boltwork properly. Affix the shaft with the provided screw in the handle and cover the screw with the

label. Route the cable through the cable hole. Push the shaft as shown above into the boltwork.

Lock and boltwork must be in the “OPEN” position.

Mount the unit with two M4 flathead screws. Connect one (1) battery to the battery clip.

Only use 9V Duracell Procell Alkaline or Energizer batteries.

*Acrylonitrile butadiene styrene, or ABS, (chemical formula (C8H8· C4H6·C3H3N) is a common thermoplastic

used to make rigid, moulded products.

EK5020

EK5040

EK5090

EK5025

EK5045

Product specificaties