M-Locks EM2010 DX Handleiding

Bekijk gratis de handleiding van M-Locks EM2010 DX (4 pagina’s), behorend tot de categorie Fűtőpárna. Deze gids werd als nuttig beoordeeld door 72 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over M-Locks EM2010 DX of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DirectXion

M-LOCKS BV Tel: +31 (0)314 376 876

Vlijtstraat 40 ver. 1.2 2010 10 28 Fax: +31 (0)314 376 878

NL-7005 BN Doetinchem 1 of 2 www.m-locks.com

Technical manual

Mounting instructions

EM2010 DX

CHARACTERISTICS

The DirectXion lock can be mounted in all four mounting directions. Also, by flipping the lock,

all blocking directions can be achieved. The mounting dimensions are standard. The lock is

delivered with metric (M6) mounting screws. The PCB board in this lock is intended as an

OEM solution for customers who would like to control the lock via their own electronics. Once

voltage is supplied the lock will open for a 5 seconds and the boltwork can be moved into

OPEN position by pushing the bolt inside the lock case. After 5 seconds the board will cut

power to blocking element regardless if voltage is still supplied from external system. When

moving the boltwork into LOCKED position the DirectXion automatically locks. To open the

lock again the voltage has to be dropped and re-applied.

BOLTWORK REQUIREMENTS and MOUNTING INSTRUCTIONS

The maximum allowed cable/spindle-hole diameter is 12mm (if located under the lock body)

If the DirectXion lock is used in conjunction with another lock, the boltwork must be

constructed in a way that the DirectXion secures first.

In the LOCKED position the distance between the

DirectXion bolt and the boltwork part that is

moving the lock bolt should be approximately 1

mm.

Only use supplied screws to mount the lock.

Tighten the screws securely so the lock body is

attached firmly to the mounting surface.

Product specificaties