Lorex ECP-01R Handleiding

Bekijk gratis de handleiding van Lorex ECP-01R (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 92 mensen en kreeg gemiddeld 4.3 sterren uit 8 reviews. Heb je een vraag over Lorex ECP-01R of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Package

ECP-01T (Transmitter)

ECP-01R (Receiver)

Quick Start

Guide

Hardware Overview

Right

Left

Top

상태표시등

LINK

상태표시등

ACT

RJ45PoE 스위치 ON/OFF

(ECP-01T 만 해당)

DC전원어댑터BNC커넥터

제품고정

나사용홀

제품고정

나사용홀

Status LED Indicator

LINK

Status LED Indicator

ACT

DC Power JackBNC connector

PoE Switch ON/OF

(ECP-01T only)

Mounting

Screw Hole

Mounting

Screw Hole

Overview

ECP-01 Series are High-Speed, long distance Ethernet & PoE extender

that makes possible to transmit the Ethernet signal and PoE up to

400m through coaxial cables in different situations.

It is cost-effective and time saving solution to migrate existing

analog system to IP based system since ECP-01 series support easy

installation utilizing the existing coaxial cable.

With long distance transmission feature, the device makes to

overcome 100 meters distance limitation easily and reduces the

construction cost significantly compared with fiber optic configuration.

Features



Long reach Ethernet & PoE extension over existing coaxial cable



Data + Power over coaxial cable



Data distance up to 1000 m



100Mpbs Full Duplex



PoE, PoE+, Extra PoE (Max. 60W PoE output, ECP-01T model only

with DC Power adapter)



LED Indication (Data, Power)



Plug & Play



Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR

(ECP-01R model only)



Slim design

Quick Start Guide

ECP-01T / ECP-01R

Please read carefully the instruction manual before use.

Contents of this manual are subject to change without prior notice

for reasons such as functionality enhancements.

Installation Guide

1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to

ECP-01R. Check LEDs on ECP-01R.

Ethernet cable

(Cat5e or better)

Coaxial cable

(RG59 or better)

PoE Switch/NVR

Check LEDs

Ethernet cable

(Cat5e or better)

Check LEDs

2. Connect coaxial cable (RG59 or better) to ECP-01R.

Connect coaxial cable from ECP-01R to ECP-01T.

Ethernet cable

(Cat5e or better)

Coaxial cable

(RG59 or better)

PoE Switch/NVR

Check LEDs

Ethernet cable

(Cat5e or better)

Check LEDs

3. Connect Ethernet cable (Cat5e or better) from ECP-01T to IP

Camera (PoE Model Only). Check LEDs on ECP-01T.

Î

Set ECP-01T, PoE Switch ON to supply direct power to IP camera.

Set ECP-01T, PoE Switch OFF to connect PC or network switch

devices.

Ethernet cable

(Cat5e or better)

Coaxial cable

(RG59 or better)

PoE Switch/NVR

Check LEDs

Ethernet cable

(Cat5e or better)

Check LEDs

LED Indicators

IndicatorColorFunction

LINK

Ethernet Data Act

ACT

Ethernet Connect Act

Rev.6.7

Product specificaties