Living & Co KL-6350C Handleiding

Bekijk gratis de handleiding van Living & Co KL-6350C (1 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over Living & Co KL-6350C of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Assembly drawing

IM Version 1.0 March 2020

•This is a Class does II product and not require an earth connection.

•Always use the type correct and wattage of bulb.

•When changing a bulb, always switch o the the light at wall socket and

allowhandling.the bulb to cool down before

•Dispose of old bulbs carefully.

•Only use the a floor lampon stable / dry and level support surface.

•Do switch not on the the light until assembly is complete.

•Do not cover the lamp or bulb could during use as this be a potential

safety hazard

•Turn o the floor lampwhen not in use.

•The floor lamp is not intended for

use by children unless suitable adult

supervision isprovided.

•Children should be with supervised to ensure they do not play thefloor

lamp.

•The floor lamp is intended for indoor use only.

•If the external exible cable or this is cord of floor lamp damaged, it shall

be exclusivelyareplaced by the manufacturer or his service agent or

similar qualied person in order tohazard.avoid a

•To to prevent damage the mains cord, do not let it pass over sharp

corners, edges or hotsurfaces.

•This floor lamp should only be on used a flat and stable surface.

•This is floor lamp not intended for use by persons with reduced

physical,mentalsensory or capabilities, or lack of experience and

knowledge,givenunless they have been supervision or instruction

concerningforsafety.use of the a appliance, by person responsible their

•Never touch surface the bulb with your bare fingers or hands.

•Grease or oil from fingers can damage the bulb and cause the bulb to burn

out, or reduceorits operating life, it is recommended to use cloth soft

facial tissue when handling thebulb.

CAUTION: Ensure that the light bulb is not within the recommended 0.5m

of any surface when operating as this could be a potential safety hazard.

CAUTION: Never exceed the bulb wattage stated.

Congratulations on your purchase of this product. Please read

the instruction manual carefully before using the . This floor lamp

manual contains important information for your safety and will

assist with correct understanding for operation and installation /

assembly of the . floor lamp

Keep this instruction manual safe for future reference.

Introduction

Introduction

Lamp shade

Support stem

Base

Overview

Overview / Assembly and Operation

DrawingAssembly

•Remove any protective plastic overwrap and ensure any packaging

materials are completely removed from the .assembly

•Follow the steps shown in the assembly drawing on Page 5.

•For step a, remove the threaded plastic shade ring (retaining nut))

fromthe lampholder body to allow fitment of the lampshade.

•For steps ) to ) ensure the different portions of the support stem andbf

base are securely threaded together (screw clockwise to tighten).

•Place the on a stable and level support surface.floor lamp

•Insert the light bulb by gently screwing into the lampholder.

•Insert the supply cord plug into a suitable mains outlet and use the in-

line cord switch to operate.

Assembly and Operation

WARNINGS

E27

ALDEN FLOOR LAMP

MODEL: KL-6350C

60W Max

280x280x1800mm

Product specificaties