Westinghouse RMHXG07201HR Handleiding
Pagina's 2 Lamp
Bekijk de handleiding van Westinghouse RMHXG07201HR gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
1. Confirm the correct input connector2. Connect the 120° Y connector3. Connect the 120° V connector
Installation Direction Notice
Notes:
For proper operation, install the light tube in the correct orientation:
1. Locate the “PUT” and “OUTPUT” markings on the tube.IN
2. Align and install the tube from PUT to OUTPUT as indicated.IN
3. Warning: If installed in the wrong direction, the light tube wl not turn on.il
1. DIY layouts are not supported. Install aording to the arw direction shown.ccro
2. Connect the light tus in series as shown. Each red circle requires its own per source.beow
3. Do not connect the light tus to AC per. Please connect the light tus to RGB control per supply.beowbeow
4. Installation must be carried out by a qualified electrician only. Do not turn on the per until installation is fully completed.ow
5. Test First: Before installation, plan your desired layout and conduct a test to ensure everything is working as excted.pe
6. Handle with Care: Ensure a cure connection when attachise
ng the light bars to the connectors. Avoid damaging the
copper pins for optimal performance.
HOW TO INSTALL IT ON THE CEILING
1. Screw Mounting - Use scrs ew
through the holes in the connector
to fasten the tube to the ceing.il
2. Metal Clip Mounting -
metal clip to the ceing with scs, ilrew
then attach the tube to the metal clip.
3. Cable Tie Mounting - Secure the
tube using the cable ties.
12
3
· Before operating this product, ensure all parts are present. Compare the included parts with the Package Contents List
and Diagram on this page.
· Please contact Customer Service for replacement parts.
· Review these instructions and diagrams thoroughly before starting.
PREPARATION
WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USE
·
This unit is not waterproof. Do not immerse in water.
·
Use only as intended. Do not use this unit for purposes other than its designated use.
·
Indoor use only.
·
Do not place or store the unit where it could fall into a tub, sink, or any other water-filled area.
·
Do not clean the product using a water spray gun or similar high-pressure methods.
·
Supervise closely when this product is used near children.
·
Use only accessories recommended or sold by the manufacturer.
·
Do not operate the unit if it has been dropped, hit sharply, or otherwise damaged in any way.
SAFETY INFORMATION
INCLUDED PARTS
FEATURES & SPECIFICATIONS
TROUBLESHOOTING
INSTALLATION INSTRUCTIONS
INPUT: 100-240VAC 50/60Hz
RGB
RF Remote Control
Suspension or Surface Mount
> 30,000 hours
5 HEX-RGB 150W
Physical & Listing
Power
PROBLEM
Tube emits cool white only,
no RGB function
Tube not light up
Poor connection
Installed with wrong orientationChange the orientation
Tighten the connection between the tube
and connector
POSSIBLE CAUSESOLUTION
Products:
RMHXG07201DR /RMHXG07201HR
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have questions or need assistance, please call
customer service at 1-888-445-8974.
Installation & Operation
Instructions
This tube can be installed in
either direction.
Dimensions (Inches)
87.2” X 60.8”
DC24V
Signal Control
either direction.
This tube can be installed in
16.14 inch | 25 s120° V Connector | 11 pcs120° Y Connector | 11 pcspc
RGB Control Power Supply | 1 pc
Screws | 25 s Metal Clip | 25 sNylon Zip Ties | 30 spcpcpc
Drywall Anchors | 25 spc
Product specificaties
| Merk: | Westinghouse |
| Categorie: | Lamp |
| Model: | RMHXG07201HR |
Heb je hulp nodig?
Als je hulp nodig hebt met Westinghouse RMHXG07201HR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden