Liftmaster MGJ5011U Handleiding

Liftmaster Niet gecategoriseerd MGJ5011U

Lees hieronder de 📖 handleiding in het Nederlandse voor Liftmaster MGJ5011U (64 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 153 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/64

EFFECTIVE MAY 2019

Commercial Door Operators

SERVICE GUIDE

This Product Is To Be Serviced By A Trained Door Systems Technician Only

TO REDUCE THE RISK OF SEVERE INJURY OR DEATH:

IMPORTANT INSTALLATION INSTRUCTIONS

1. READ AND FOLLOW ALL INSTALLATION WARNINGS AND

INSTRUCTIONS.

2. Install door operator ONLY on a properly balanced and

lubricated door. An improperly balanced door may NOT

reverse when required and could result in SEVERE INJURY

or DEATH.

3. ALL repairs to cables, spring assemblies and other hardware

MUST be made by a trained door systems technician BEFORE

installing an operator.

4. Disable ALL locks and remove ALL ropes connected to a

door BEFORE installing an operator to avoid entanglement.

5. Install an operator, a minimum of 8 feet (2.44 m) from the

floor.

6. NEVER connect a door operator to a power source until

instructed to do so.

7. NEVER wear watches, rings or loose clothing while installing

or servicing an operator. They could be caught in the door or

operator mechanisms.

8. Install a control station:

• within sight of the door

• out of reach of small children and at a minimum height of

5 feet (1.5 m) above floors, landings, steps, or any other

adjacent walking surface.

• away from ALL moving parts of the door

9. Install the control station far enough from the door to

prevent the user from coming in contact with the door while

operating the controls.

10. Install the entrapment warning placard on the wall next to

the control station in a prominent location, visible from the

door.

11. Place the manual release/safety reverse test label in plain

view on the inside of door.

12. Upon completion of installation, test the entrapment

protection device(s).

13. SAVE THESE INSTRUCTIONS.

When you see these Safety Symbols and Signal Words on the

following pages, they will alert you to the possibility of serious

injury death or if you do not comply with the warnings that

accompany them. The hazard may come from something

mechanical or from electric shock. Read the warnings carefully.

When you see this Signal Word on the following pages, it will

alert you to the possibility of damage to your door and/or the

door operator if you do not comply with the cautionary

statements that accompany it. Read them carefully.

Mechanical

Electrical

IMPORTANT NOTES:

• BEFORE attempting to install, operate or maintain the

commercial door operator, you must read and fully understand

this manual and follow all safety instructions.

• DO NOT attempt repair or service of a commercial door

operator unless you are an Authorized Service Technician.

• A commercial door operator should only be installed on a

properly balanced door only. Ensure door is properly balanced

prior to installation.

SAFETY INFORMATION

ENTRAPMENT PROTECTION DEVICES:

LiftMaster Monitored Entrapment Protection (LMEP)

Monitored photoelectric sensors and/or door edge sensors are

required for any momentary contact to close modes of operation.

Refer to operator manual for additional information. Refer to the

‘Commercial Door Entrapment Protection Systems’, and

accessories page 64, for available options.

General Information

This guide is intended to help with Commercial Door Operator maintenance and troubleshooting. The guide offers several

different troubleshooting scenarios and provides answers to frequently asked questions. The comprehensive, yet user-friendly

guide will hopefully be used as a tool to solve all of the Commercial Door Operator maintenance problems you may encounter.

SECTION A

Basic Troubleshooting 5-6

SECTION B

Logic Operators

Industrial Duty Logic Operators 8-26

Medium Duty Logic Operators 27-31

SECTION C

Mechanical Operators 34-36

SECTION D

Basic Electrical Information 38-45

SECTION E

General Information 46-52

SECTION F

Wiring Diagrams 54-62

Commercial Door Entrapment Protection Systems 64

Product specificaties

Merk:	Liftmaster
Categorie:	Niet gecategoriseerd
Model:	MGJ5011U

Heb je hulp nodig?

Als je hulp nodig hebt met Liftmaster MGJ5011U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Liftmaster

Liftmaster CAPXSHOOD Handleiding

8 December 2023

Liftmaster 041DJ003MC Handleiding

17 Augustus 2023

Liftmaster myQ-SGC2WCH Handleiding

9 Juli 2023

Liftmaster CAPXS Handleiding

9 Juli 2023

Liftmaster 041D8006-1 Handleiding

9 Juli 2023

Liftmaster IHSL24UL Handleiding

9 Juli 2023

Liftmaster LJ8900W Handleiding

9 Juli 2023

Liftmaster MGJ5011U Handleiding

8 Juli 2023

Liftmaster 041A7767 Handleiding

8 Juli 2023

Liftmaster 41K4629 Handleiding

8 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024