Liftmaster LMI5 Handleiding

Bekijk gratis de handleiding van Liftmaster LMI5 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over Liftmaster LMI5 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CONNECTION DIAGRAM FOR

POWERLINECONVERTER

PART #111014

INTRODUCTION

The Power Line Converter allows the connection of a PNP sensor with an

active output to an LMi5 interface or other LiftMaster operators, which

expects dry contact signals.

The device provides +24VDC to the sensor from its onboard power

supply. The figure below shows the Power Line Converter’s connection

diagram between LMi5 and WS-Sensor-E.

WARNING: This product can expose you to chemicals

including lead, which are known to the State of California to

cause cancer or birth defects or other reproductive harm. For

more information go to www.P65Warnings.ca.gov.

114A5842

© 202, LiftMaster3

All Rights Reserved

Tous droits réservés

Todos los derechos reservados

LiftMaster

300 Windsor Drive

Oak Brook, IL 60523

LiftMaster.com

Important:

Please refer to manufacturer's manual for

electrical specifications of the device.

Note:

Dry use only.

Secure firmly to the wall.

Carton Inventory: 1 Unit Power Line Converter device

Not Included: Mounting hardware, WS-Sensor-E, LMi5, 100MAPS

Input Power: 120 VAC 60Hz or 100MAPS (+24VDC)

Product specificaties