Liftmaster 041A3504-1 Handleiding
Pagina's 1 Engels Niet gecategoriseerd
Bekijk de handleiding van Liftmaster 041A3504-1 gratis online of download de PDF. Deze handleiding is 20 keer bekeken. Vraag over dit model? Stel een vraag
To prevent possible SERIOUS INJURY or DEATH from
electrocution, disconnect power to opener BEFORE proceeding.
© 2008 The Chamberlain Group, Inc.
114A2668B All Rights Reserved
433MHz Receiver Logic Board
Antenna Extension Kit
Model 41A3504-1
Plug smooth
end into
logic board
connector
Connector
under "Learn"
Button
Antenna to be
placed on end of
coaxial cable, or
mounted on
exterior antenna
bracket
Antenna
bracket
The Antenna Extension Kit model 41A3504-1 was
designed to work with the 433MHz Receiver
Logic Boards.
This kit contains an antenna, coaxial cable, adapter and
an antenna bracket.
After replacing your receiver panel, follow the instructions
below to access the logic board connector and install the
antenna extension.
Installation
1. Screw the threaded end of the adapter into either end
of the coaxial cable.
2. Plug the smooth end of the adapter into the connector
on the logic board. The connector is located under the
“Learn” button on the rear panel of the opener.
3. The antenna bracket can be mounted inside on the
header, or for maximum range, outside the structure.
Route the coaxial cable accordingly.
4. Attach the antenna and coaxial cable to the antenna
bracket as illustrated.
5. Mount antenna bracket so the antenna is unobstructed
and away from any metal or steel.
NOTE:Do NOT modify or remove the existing antenna.
Screw threaded
end of Adapter
into Coaxial Cable
Product specificaties
| Merk: | Liftmaster |
| Categorie: | Niet gecategoriseerd |
| Model: | 041A3504-1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Liftmaster 041A3504-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden