LG AG-S360 Handleiding

LG 3d-brill AG-S360

Lees hieronder de 📖 handleiding in het Nederlandse voor LG AG-S360 (6 pagina's) in de categorie 3d-brill. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

www.lg.com

(Brazil : www.lge.com)

OWNER'S MANUAL

3D Glasses

Please read the safety information carefully before using the product.

AG-S360

P/NO: SAC34026215 (1304-REV00)

ENGLISH

ABOUT THE PRODUCT

The AG-S360 is a pair of 3D glasses that use radio frequency (RF) (2.4 GHz) wireless communication.

■Connect them to any TV compatible with RF glasses and enjoy vivid 3D images.

■Watch 3D movies and view 3D photos with 3D glasses.

■When using 3D glasses for the ﬁrst time, make sure the coin cell battery is inserted correctly.

ACCESSORIES

3D Glasses

(Body, Leg)

Nose Pad

(for users wear-

ing regular

eyeglasses)

Coin Cell Battery

(CR2025)

Manual CD Quick Guide Cleaning Pad

NOTE ▶ The accessories may look different from those shown here.

PART NAMES

Power Button/LED Indicator

Battery Slot

Lenses

Nose Pad

PAIRING 3D GLASSES WITH 3D TV *1

*1 Pairing means establishing a wireless connection between the 3D TV and 3D glasses.

The 3D glasses pair with the 3D TV that has the strongest wireless signal. If there is more than one TV, place the 3D glasses within

10 cm of the 3D TV you want to pair with.

Recommended Pairing Distance:

10 cm

Pairing the Glasses Re-pairing the Glasses

͢͡ʹΞ

1. Turn the 3D TV on and activate 3D mode. 1. Press and hold the power button on the

3D glasses for at least eight seconds until

the LED indicator turns green.

2. Place your 3D glasses within the recom-

mended pairing distance and turn them

on.

2. After the green LED indicator ﬂashes

three times, the glasses are ready to pair.

3. During pairing, the LED indicator ﬂashes

green and red alternately.

3. Turn the 3D TV on and activate 3D mode.

4. When pairing is complete, the LED

indicator goes off and the 3D glasses are

ready to use.

4. Place your 3D glasses within the recom-

mended pairing distance and turn them

on.

5. It is unnecessary to pair the 3D glasses

with the same 3D TV again.

5. During pairing, the LED indicator ﬂashes

green and red alternately.

6. When pairing is complete, the LED indica-

tor goes off and pairing with the second

3D TV is complete.

NOTE

▶The 3D glasses detect the unique ID of the TV within the recommended pairing distance; a pair of 3D

glasses cannot detect more than one TV.

▶If you want to connect the glasses to another TV, see "Re-syncing the Glasses."

ENGLISH

USING 3D GLASSES

Button Operation LED Indicator

Power On Press and hold the power button for one to two

seconds. The red LED indicator ﬂashes once.

Power Off Press and hold the power button for one to two

seconds until the LED indicator turns red. The red LED indicator ﬂashes three times.

Auto Off*1 The product is automatically turned off if there

is no 3D signal for more than one minute. The red LED ﬂashes three times.

Battery discharge -The red LED ﬂashes for one minute and

turns off automatically.

Re-syncing the Glasses Press the power button for at least eight sec-

onds.

When the LED indicator turns green, release

the power button. The green LED indicator

ﬂashes three times and turns off. If you turn

the power on again, the 3D glasses detect

the TV with the strongest signal.

*1 The Auto Off function automatically turns the power off when there is no signal between the TV and glasses for more than one

minute. You cannot watch 3D images when the Auto Off function automatically turns the power off. This can happen when the

distance or angle between the TV and glasses is out of range; when there is a barrier between the TV and glasses; or when the TV

is switched from 3D to 2D mode.

NOTE ▶Make sure to turn off the 3D glasses when they are not in use. Otherwise, the battery life shortens.

ASSEMBLING THE GLASSES

The temple arms of the glasses are provided in the package. Attach them to the frame according to the in-

structions below.

1Insert each arm into the frame in the direction shown in the

ﬁgure until it clicks.

NOTE ▶Make sure that the left and right arms are attached to the corresponding side of the frame.

REPLACING THE BATTERY

The coin cell battery is not rechargeable. Please replace it when the red LED indicator ﬂashes continuously.

12 3 4

Locate the battery cover. Press the cover slightly,

then lift it up.

Pull the cover open. Place the battery onto the

cover, then close the cover.

NOTE ▶Make sure that the battery is inserted correctly with the plus sign facing towards the same sign marked

on the cover.

CAUTION ▶Risk of explosion if battery is replaced by an incorrect type.

▶dispose of used batteries according to the instruction.

ATTACHING THE NOSE PAD

Using 3D glasses may not be comfortable for users wearing regular eyeglasses. Adjusting the nose pad can

improve your viewing comfort.

1 2 -Pull the nose pad in the direction shown by the arrow in the

image. Be careful not to twist or lift the nose pad, as this can

cause damage.

-Remove the nose pad when the battery cover is fully closed.

NOTE ▶Follow the instructions in reverse order to reattach the nose pad.

▶The nose pad can be adjusted even if you are not wearing glasses.

Product specificaties

Merk:	LG
Categorie:	3d-brill
Model:	AG-S360
Kleur van het product:	Zwart
Gewicht:	28 g
Oplaadtijd:	2 uur
Levensduur accu/batterij:	40 uur
Aantal per verpakking:	1 stuk(s)
Compatibele producten:	PH660S, PH670S