LevelOne WAP-1001 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor LevelOne WAP-1001 (49 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/49
LevelOne
WAP-1001
11g Outdoor Wireless AP/Bridge
User Manual
Ver.1.02-0917
1
FCC Notice
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. Ho tee that interference will wever, there is no guaran
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/wireless technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
The manufacture is not responsible for any radio or wireless interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
2
3
The Wireless Technology
Standard
The Wireless Access Point utilizes the 802.11b and the 802.11g standards. The
IEEE 802.11g standard is an extension of the 802.11b standard. It increases
the data rate up to 54 Mbps (108Mbps in Super G mode) within the 2.4GHz
band, utilizing OFDM technology. This means that in most environments, within
the specied range of this device, you will be able to transfer large files quickly
or even watch a movie in MPEG format you’re your network without noticeable
delays. This technology works by transmitting high-speed digital data over a
radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing)
technology. OFDM works by splitting the radio signal into multiple smaller
sub-signals that are then transmitted simultaneously at different frequencies to
the receiver. OFDM reduces the amount of cross talk (interference) in signal
transmissions. The AP will automatically sense the best possible connection
speed to ensure the greatest speed and range possible. 802.11g offers the
most advanced network security features available today, including: WEP,WPA,
TKIP, AES and Pre-Shared Key mode.
Planning Your Wireless Network
Network Topology
A wireless network is a group of computers, each equipped with one wireless
adapter. Computers in a wireless network must be congured to share the
same radio channel. Several PCs equipped with wireless cards or adapters can
communicate with one another to form an ad-hoc network. The wireless
adapters also provide users access to a wired network when using an access
point or wireless router. An integrated wireless and wired network is called an
infrastructure network. Each wireless PC in an infrastructure network can talk
to any computer in a wired network infrastructure via the access point or
wireless router. An infrastructure configuration extends the accessibility of a
wireless PC to a wired network, and may double the effective wireless
transmission range for two wireless adapter PCs. Since an access point is able
to forward data within a network, the effective transmission range in an
infrastructure network may be doubled.


Product specificaties

Merk: LevelOne
Categorie: Access point
Model: WAP-1001
Stroomvoorziening: 48VDC, 300mA
Aantal Ethernet LAN (RJ-45)-poorten: 1
Certificering: FCC, CE
Aansluiting voor netstroomadapter: Ja
Voldoet aan industriestandaarden: IEEE802.11b/g, IEEE802.3, IEEE802.3u, IEEE802.3x
Modulatie: CCK, DBPSK, DQPSK, OFDM
Ondersteunde beveiligingsalgoritmen: WPA, WPA-PSK
Antenne versterkingsniveau (max): 12 dBi
Soort voeding: 100 - 240V, 50 - 60Hz, 0.25A
Intern: Nee
Maximale overdrachtssnelheid van gegevens: 54 Mbit/s
Power over Ethernet (PoE): Ja
Relatieve luchtvochtigheid bij opslag (geen condensering): 10 - 90 procent
Ondersteunde data-overdrachtsnelheden: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mb/s
Aantal kanalen: 13 kanalen
Afmetingen (B x D x H): 320 x 310 x 90 mm
Bandbreedte: 2.412 GHz
Bedrijfstemperatuur (T-T): -20 - 70 °C
Zendvermogensgebied: 18dBm dBmW

Heb je hulp nodig?

Als je hulp nodig hebt met LevelOne WAP-1001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Access point LevelOne

Handleiding Access point

Nieuwste handleidingen voor Access point