Lenco CS-420 Handleiding

Lenco Autoradio's CS-420

Lees hieronder de 📖 handleiding in het Nederlandse voor Lenco CS-420 (71 pagina's) in de categorie Autoradio's. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/71

CS-420

INSTRUCTION MANUAL

AM/FM-RDS DIGITAL PLL TUNING RADIO

SD/USB/MP3/WMA PLAYER

www.lenco.com

LOCATION AND FUNCTION OF CONTROLS

1. RELEASE BUTTON

Press the REL button to release the front control panel from the unit chassis, then pull it up a little to

remove from the unit chassis.

When the front control panel is removed the LED indicator flashes.

2&3&4. SEL BUTTON (Select) AND VOL+/VOL- BUTTONS

a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL.

-> VOL ->BASS ->TRE -> BAL -> FAD->

When selecting a desired E.VOL mode, press the VOL+ or VOL- button to adjust.

In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last

display mode .

The mode of E.VOL is operated with following numeric display.

- VOL: MIN(00), 01,......46, MAX(47).

- BASS/TRE: -07, -06,...,00,...+06,+07

- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0

- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0

b) Press SEL button and hold for more than 2 seconds to turn on TA SEEK/TA ALARM mode, then press

SEL button shortly and repeatedly to select PI SOUND/PI MUTE, RETUNE L/RETUNE S, MASK

DPI/MASK ALL, BEEP ON/BEEP OFF, USER SET

(FLAT/CLASSIC/ROCK/POP),VOL LAST/VOL DEFA ,

STEREO/MONO(in RADIO mode), LOUD OFF/LOUD ON,DX/LOCAL (in RADIO mode), CLK

ON/CLK OFF, CLK 12/24 mode.

After selecting a desired mode, press the VOL- or VOL+ button to select one setup item of the desired

mode.

1) TA SEEK/TA ALARM:

TA SEEK mode: when newly tuned station does not receive TP information for 5 seconds, the radio

retunes to next station which has not the same station (PI) as the last station, but has the TP

information.

When TP information gets lost at the current station for retune time which is set by RETUNE

SHORT(90 seconds) or RETUNE LONG(150 seconds), the radio start to retune to next same PI

station. When same PI station does not catch in 1 cyclic search, the radio retunes to next station with

TP information.

TA ALARM mode: when this mode is selected, any automatic retune mode is not activated.

Only double beep sound(ALARM) is out-put.

When newly tuned station does not have TP information for 5 seconds, beeps come out.

When TP information gets lost at the current station for retune time, the beep sound is out-putted.

When newly tuned station has not RDS signal, PI SEEK is suppressed somewhat

2) PI SOUND/ PI MUTE:

PI SOUND mode: if a car cruises that critical area back and forth, an oscillation phenomenon can be

occurred, because the different PI code can be receive from a same AF. when the different PI sound

(DIP) is heard once in a while, the different PI sound will be heard for less than 1 second.

PI MUTE mode: under above same situation, a mute sound will be heard for less than1second.

3) RETUNE L / RETUNE S:

The initial time of automatic TA search or PI SEARCH mode is selected.

When PI information is not caught for retune time , the radio start to retune to next same PI station.

When same PI station does not catch 1 cyclic search, the radio goes to last station and waits for 4-5

minutes until PI code is received.

RETUNE L mode: selected as 150 seconds.

RETUNE S mode: selected as 90 seconds.

4) MASK DPI/MASK ALL:

MASK DPI mode: masked only the AF which has different PI.

MASK ALL mode: masked the AF which has different PI and NO RDS signal with high field strength.

5)BEEP ON/BEEP OFF

BEEP ON mode: The beep sound is generated when any key is pressed.

BEEP OFF mode: The beep sound is disabled.

6) VOL LAST/VOL DEFA

VOL LAST: When power on the unit, the volume level is equal to the one when the unit was last

switched off.

VOL DEFA: After selecting VOL DEFA, press SEL button to display AVOL, then press VOL+ or VOL-

button to adjust AVOL level.

After ACC-power off and ACC-power on the unit, the volume level is equal to the AVOL

level.

7)CLK ON/OFF

CLK ON: Clock will always show on the display when power off.

CLK OFF: Clock will disappear on the display when power off.

5. POWER ON/OFF & MUTE

When the unit is power off, the unit comes to on by pressing any button except the the RELEASE

button.

When the unit is power on, press and hold the power button for more than 0.5 seconds, the unit goes

into power off mode.

When the unit is power on, press the power to switch the MUTE state on/off.

6. LCD Display

7&8. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS

a) In RADIO mode:

Product specificaties

Merk:	Lenco
Categorie:	Autoradio's
Model:	CS-420
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Bluetooth:	Nee
USB-poort:	Ja
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD
Aantal USB-aansluitingen:	1
FM-radio:	Ja
USB-versie:	2.0
Uitgangsvermogen:	40 W
Audio-uitgangskanalen:	4.0 kanalen
AUX ingang:	Ja
Ondersteunde frequentiebanden:	AM, FM
Inclusief RDS tuner:	Ja
USB direct afspelen:	Ja
CD-R afspelen:	Nee
CD-RW afspelen:	Nee
Kleur toetsenverlichting:	Rood
Line outputs (RCA):	1