Lasko Twist-Top T12110 Handleiding

Lasko Ventilator Twist-Top T12110

Lees hieronder de 📖 handleiding in het Nederlandse voor Lasko Twist-Top T12110 (4 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
MANTENIMIENTO Para reducir el riesgo de choque eléctrico e incendio, por favor obedezca las
siguientes instrucciones.
- Siempre desconecte el cable eléctrico antes de trasladar, reparar o limpiar.
- coloque el Ventilador dentro de o cerca de agua.NUNCA
- Limpie el Ventilador únicamente con una aspiradora equipada con un accesorio de cepillo; la aspiradora quitará
el polvillo y los desperdicios del interior del Ventilador.
- intente desarma el Ventilador. NUNCA
- Limpie el cuerpo del Ventilador únicamente con un trapo suave.
- use ALCOHOL o SOLVENTES tales como gasolina, bencina, disolvente para pinturas u otros NUNCA
limpiadores duros.
New 9/13 8 T12110ES
MODELO T12110
REPARACIONES: Para cualquier reparación, que no sea de mantenimiento general por parte del usuario, por favor contacte a nuestro
equipo de Servicio al Cliente al (800) 233-0268 de Lunes a Viernes de 8 a.m. a 5 p.m.
ALMACENAMIENTO: Almacene el Ventilador con estas instrucciones, en la caja original en un lugar fresco y seco.
DISPOSICIÓN: Los materiales de empaque de cartón corrugado son reciclables. Para desechar este producto de manera
ecológicamente responsable, comuníquese con su proveedor de servicio de desechos local o visite www.1800recycling.com®.
TWIST TOP TOWER FAN
MODEL T12110
IMPORTANT INSTRUCTIONS -
OPERATING MAN U AL
New 9/13 1T12110ES
This Fan is for residential use only.
It is not intended to be used in commercial, industrial or agricultural settings.
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE,
INSTALL, OP ER ATE OR MAINTAIN THE PROD UCT DE SCRIBED.
PRO TECT YOUR SELF AND OTHERS BY OBSERVING ALL SAFETY
IN FOR MA TION. FAIL URE TO COMPLY WITH INSTRUCTIONS COULD
RESULT IN PERSONAL INJURY AND/OR PROP ER TY DAM AGE!
Have a Question? Need a Part?
Please Do Not Return Product to Store!
Contact Lasko Customer Service:
1-800-233-0268 Monday-Friday 8AM - 5PM EST.
SERVICIO AL CLIENTE:
Línea gratuita (800) 233-0268. Correo electrónico: producthelp@laskoproducts.com
Nuestro equipo de Servicio al Cliente está disponible para ayudarle con preguntas sobre productos, ubicaciones de
los centros de reparación y repuestos. Se puede comunicar con nuestro equipo de Servicio al Cliente de lunes a
viernes, de 8 a.m. a 5 p.m. hora del Este. Por favor tenga disponible el número de modelo, así como también el tipo y
estilo (ubicados en la parte inferior de su producto).
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Por favor no envíe el producto a esta dirección) www.laskoproducts.com
GARANTÍA LIMITADA DE LASKO PRODUCTS, INC.
(VÁLIDO EN EE.UU., SUS TERRITORIOS, Y CANADÁ ÚNICAMENTE)
QUÉ CUBRE ESTA GARANTÍAS: Este producto está garantizado contra defectos de mano de obra y/o materiales.
CUÁNTO DURA ESTA GARANTÍA: Esta garantía se extiende únicamente al comprador original del producto y dura un (1) año a partir de la fecha
original de compra o hasta que el comprador original del producto venda o transfiera el producto, cualesquiera de ambas que ocurriera en primer lugar.
QUÉ HARÁ LASKO: Lasko, a opción propia, reparará o reemplazará cualquier parte o partes que demuestren ser defectuosas o reemplazará el
producto completo por el mismo modelo u otro comparable. Para todas las reclamaciones de garantía, se debe devolver el producto a Lasko
Products, Inc. a cargo del cliente con la prueba de compra dentro del período de garantía. Comuníquese con el departamento de atención al cliente
de Lasko para obtener una Autorización de Devolución (“RA”, por sus siglas en inglés). NO devuelva los productos sin una RA o no se procesará la
reclamación de la garantía.
QUÉ NO CUBRE ESTA GARANTÍA: Esta garantía no tiene validez si el producto fue dañado o falló debido a un accidente, manipulación u operación
inadecuadas, daño en el envío, abuso, mal uso, reparaciones no autorizadas hechas o el intento de hacerlas. Esta garantía no cubre los costos de
envío para la devolución de productos a Lasko para su reparación o reemplazo. Lasko abonará los cargos de envío de devolución a Lasko con
posterioridad a las reparaciones o el reemplazo bajo garantía.
CUALESQUIERA Y TODAS LAS GARANTÍAS, EXPLÍCITAS O IMPLÍCITAS (INCLUYENDO, SIN LIMITACIÓN, CUALESQUIERA GARANTÍA IMPLÍCITA
DE COMERCIABILIDAD), DURAN UN AÑO A PARTIR DE LA FECHA ORIGINAL DE COMPRA O HASTA QUE EL COMPRADOR ORIGINAL DEL
PRODUCTO VENDA O TRANSFIERA EL PRODUCTO, CUALESQUIERA DE AMBAS QUE OCURRIERA EN PRIMER LUGAR Y EN NINGÚN
CASO LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA INCLUIRÁ (I) DAÑOS INCIDENTALES O POR
CONSECUENCIA POR CUALQUIER CAUSA QUE FUERE, O (II) REEMPLAZO O REPARACIÓN DE CUALESQUIERA FUSIBLES HOGAREÑOS,
CORTA-CIRCUITOS O TOMACORRIENTES. INDEPENDIENTEMENTE DE CUALQUIER DECLARACIÓN CONTRARIA, EN NINGÚN CASO
LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA PODRÁ EXCEDER EL PRECIO DE COMPRA DEL
PRODUCTO Y DICHA RESPONSABILIDAD TERMINARÁ AL VENCIMIENTO DEL PERÍODO DE GARANTÍA.
Algunos estados y provincias no permiten limitaciones sobre la duración de una garantía implícita, o sobre la exclusión o limitación de los daños
incidentales o por consecuencia, por lo tanto dichas exclusiones o limitaciones podrían no aplicarse en su caso. Esta garantía le otorga a usted
derechos legales específicos. Usted también podría tener otros derechos que varían de estado en estado y de provincia en provincia.
Se requiere prueba de compra antes que se acepte un reclamo bajo garantía.
New 9/13 2 T12110ES New 9/13 7 T12110ES
MODELO T12110
FUNCIONAMIENTO (Figuras 1 y 2)
1. Cuidadosamente retire el Ventilador de la bolsa plástica
y la caja.
2. Coloque el ventilador sobre una superficie firme y
nivelada.
Los tacos de plástico o hule, tales como las patas de esta
unidad, pueden pegarse a la superficie de los muebles.
La unidad podría dejar un residuo capaz de oscurecer,
manchar o dejar marcas permanentes en el acabado de
ciertas superficies de muebles, incluyendo superficies y
pisos de madera.
3. Conecte el cable eléctrico a un tomacorriente de 120
voltios.
Asegúrese que el enchufe encaje firmemente en el
tomacorriente.
Cuando los enchufes quedan flojos en los
tomacorrientes, pueden deslizarse parcial
o completamente fuera del tomacorriente
con un leve movimiento del cable adosado.
Los tomacorrientes en este estado podrían
sobrecalentarse y representar un grave peligro
de incendio; si está cubierto por una cortina o
tela, el riesgo de incendio es aún mayor.
4. Encienda el Ventilador oprimiendo el Botón De Encendido
( ). Botón De Encendido se iluminará cuando el equipo
haya sido encendido.
5. Al encender el Ventilador, el equipo estará funcionando
en ALTO.
6. Si oprime el por segunda vez, el Botón De Encendido
Ventilador quedará en MEDIANO.
7. Si oprime el por tercera vez, el Botón De Encendido
Ventilador quedará en BAJO.
8. Para APAGAR el Ventilador, oprima el Botón de Encendido/
Apagado ( ). La luz de encendido se apagará una vez
que el equipo esté apagado.
9. Después de apagar el Ventilador, desconecte la unidad
del tomacorriente eléctrico.
Figura 1
Botón De
Encendido
Botón De
Oscilación
FUNCIÓN DE OSCILACIÓN: Esta función podrá ser activada
con cualquier velocidad del Ventilador. Si oprime el Botón De
Oscilación ( ), permitirá que el Ventilador oscile en ambas
direcciones. Para detener la oscilación, oprima el Botón De
Oscilación una vez más. Botón De Oscilación se ilumina
cuando esta función se encuentre activada.
INSTRUCCIONES MULTIDIRECCIONALES
(Figura 2)
La mitad superior del Ventilador puede orientarse en una dirección
diferente a la de la mitad inferior del mismo. La función de
oscilación podrá activarse con el ventilador enfrentando cualquier
dirección.
1. Sostenga la y la en forma Base Parte Inferior De Ventilador
estacionaria.
2. Tome la Parte Superior De Ventilador y gírela a la posición que
desee.
ADVERTENCIA: NO INTENTE HACER GIRAR EL VENTILADOR
MÁS ALLÁ DE SU PUNTO DE RESISTENCIA, PUES ELLO
DAÑARÁ EL VENTILADOR.
Figura 2
Base
Parte Inferior
De Ventilador
Parte Superior
De Ventilador
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be fol lowed to re duce
the risk of fire, electrical shock and injury to per sons, including the following:
Read all instructions before using this Fan.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints, DO NOT
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the
outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this
condition should be replaced by a qualified electrician.
ALWAYS unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole
means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and
unplug the Fan when not in use.
BE CERTAIN that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be removed Plug
or tampered with. To reduce the risk of fire, electric shock and personal injury, attempt to remove, replace, repair or DO NOT
tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device incorporated
in this plug. THIS FAN HAS A POLARIZED PLUG (one blade is wider than the other). This plug is designed to fit into the outlet
only one way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety
feature. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
AVOID the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these
devices may overheat and cause a fire hazard.
route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire DO NOT
hazard.
ALWAYS place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
NEVER insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
block, cover or obstruct air flow to or from the fan while in operation.DO NOT
use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location DO NOT
may create a shock hazard.
route power cord in or through areas such as doorways or where the cord may be damaged or create a tripping hazard.DO NOT
use a single extension cord to operate more than one Fan or other electrical device.NEVER
use this Fan in a window. Rain may create an electrical hazard.DO NOT
use this Fan if it has been damaged or is not functioning properly.DO NOT
operate any fan with a damaged cord or plug. Discard fan. DO NOT
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).This Fan is not suitable for use in agricultural
facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article
547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).This Fan is not suitable for use in hazardous
locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical
requirements for hazardous locations.
NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient
or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the
user’s authority to operate this equipment.
CAUTION
Figure 1
Power
But ton
Oscillation
Button
New 9/13 6 T12110ES New 9/13 3 T12110ES
MODEL T12110
OPERATION (Figures 1 and 2)
1. Carefully remove the Fan from the plastic bag and the
carton.
2. Place the Fan on a firm and level surface.
Plastic or rubber tabs, like the feet on this unit, may stick
to furniture surfaces and/or hardwood floors. The unit may
leave a res i due that could dark en, stain or leave per ma nent
blem ish es on the finish of cer tain furniture surfaces, includ-
ing wood surfaces, and/or hard wood floors.
3. Plug the cord set into a 120 volt outlet.
Be sure that the plug fits tightly into outlet.
When plugs fit loose ly into re cep ta cles, they
may slip partially or com plete ly out of the re-
ceptacle with only the slight move ment of the
attached cord. Re cep ta cles in this con di tion
may over heat and pose a serious fire haz ard; if
cov ered by a cur tain or drape, the fire haz ard
is even great er.
4. Turn the Fan ON by pressing the (Power Button ). The
Power Button will light when the unit is turned on.
5. Upon turning the Fan ON, the unit will be on HIGH.
6. Pressing the a sec ond time will set the Power Button
Fan to ME DI UM.
7. Pressing the Power Button a third time will set the Fan
to LOW.
8. To turn the Fan OFF, press the (Power Button ). The
pow er light will go out when the unit is off.
9. After turning the Fan off, unplug the unit from the
elec tri cal outlet.
MULTI-DIRECTIONAL INSTRUCTIONS
(Figure 2)
The top half of the Fan can be manually turned a different
direction than the bottom half of the Fan. The oscillation
func tion will work with the top half of the fan fac ing any
direction.
1. Hold the and the stationary.Base Bottom Fan
2. Grasp the Top Fan and turn it to the desired position.
CAUTION: DO NOT ATTEMPT TO TURN THE FAN BE-
YOND THE POINT OF RESISTANCE. THIS WILL DAMAGE
THE FAN.
OSCILLATION FUNCTION: This function will work in any
Fan speed. Press ing the ( )will al low Oscillation Button
the Fan to os cil late back and forth. To stop the os cil la tion,
press the Os cil la tion But ton Oscillation once more. The
Button will light when this func tion is in use.
Figure 2
Base
Bottom Fan
Top Fan
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Cuando use este ventilador, se deben de seguir las siguientes advertencias y
precauciones para reducir el riesgo de incendio, descargas eléctricas y lesiones:
Lea todas las instrucciones antes de usar este Ventilador.
NO utilice este ventilador para ventilar las zonas donde se usen, almacenen o estén presentes líquidos o vapores inflam-
ables, incluidos pinturas, gasolina, barnices, disolventes o productos de acabado para pisos. ¡SIEMPRE lea y siga todas las
advertencias e instrucciones descritas en los envases de estos productos!
SIEMPRE asegúrese de que el enchufe encaje bien en el tomacorriente. Cuando los enchufes no encajan bien en el tomacor-
riente, pueden deslizarse un poco y crear una mala conexión. Esto puede causar que los tomacorrientes se sobrecalienten y
crear un riesgo de incendio potencial. Un electricista calificado debe cambiar los tomacorrientes que se encuentren en esta
condición.
SIEMPRE desenchufe el cable de corriente cuando realice mantenimiento, limpieza o mueva el ventilador. NO use el inter-
ruptor ENCENDIDO/APAGADO (ON/OFF) como el único medio para desconectar de la electricidad. NUNCA deje a los niños
sin supervisión cuando el ventilador esté encendido o conectado. apague y desenchufe el ventilador cuando no SIEMPRE
esté en uso.
ASEGURESE que la fuente de energía para el ventilador sea de 120V AC. NO enchufe el ventilador en una fuente de energía
de 240V ni en ninguna otra fuente de energía que no sea la indicada.
El en su ventilador Lasko es una característica de seguridad. Contiene un dispositivo de seguridad no remplazable Plug
(fusible) que no debe ser removido ni manipulado. Para reducir el riesgo de incendios, descargas eléctricas y lesiones, NO
remueva, remplace, repare ni manipule el enchufe suministrado originalmente. Si el ventilador no funciona adecuadamente,
puede deberse al dispositivo de seguridad incorporado en este enchufe. ESTE ARTEFACTO TIENE UN ENCHUFE POLAR-
IZADO (una hoja del ventilador es más amplia que la otra). Este enchufe está diseñado para encajar en el tomacorriente de
una sola forma. Haga coincidir la patilla ancha del enchufe con la ranura ancha del tomacorriente e INSÉRTELA COMPLETA-
MENTE. NO intente modificar o anular esta medida de seguridad. Si el enchufe no encaja en el tomacorriente, consulte a un
electricista calificado. El enchufe puede necesitar ser remplazado.
el uso de cables de extensión, enchufes múltiples, triples, ambientadores eléctricos u otro dispositivo conectado por cables, EVITE
ya que estos dispositivos pueden sobrecalentarse y causar un riesgo de incendio.
coloque los cables de alimentación debajo de alfombras, tapetes o muebles. Esto puede dañar el cable o causar que se NO
sobrecaliente y originar un riesgo de incendio
SIEMPRE colocar el ventilador en una superficie estable, plana y nivelada mientras esfuncionando para evitar que el ventilador se caiga.
inserte ni permita que introduzcan los dedos u objetos en las aberturas de la parrilla del ventilador mientras este esté en NUNCA
funcionamiento, p3-ya que el ventilador puede dañarse o malograrse.
bloquee, cubra ni obstruya el flujo de aire hacia o desde el ventilador mientras esté en funcionamiento.NO
utilice este ventilador al aire libre o cerca del agua o lugares húmedos como bañeras, piscinas o jacuzzis. El uso de este NO
ventilador en un lugar húmedo puede provocar una descarga eléctrica.
coloque el cable de alimentación en o por áreas tales como puertas o donde el cable se pueda dañar o crear el peligro de que se NO
tropiecen.
use un solo cable de extensión para hacer funcionar más de un ventilador u otro aparato eléctrico.NUNCA
use este ventilador en una ventana. La lluvia puede causar un peligro eléctrico.NO
use este ventilador si es que se p3-ha dañado o si no funcione adecuadamente. NO
opere este ventilador si el cordón o clavija presentan daño. Deseche el ventilador.NO
Este ventilador no es ESTE VENTILADOR NO CUMPLE CON LOS REQUERIMIENTOS DEL ARTÍCULO 547-7 (2008) DEL NEC.
adecuado para su uso en instalaciones agrícolas, incluyendo las áreas donde el ganado, aves de corral u otros animales están
encerrados. Consulte el Artículo 547-7 (2008) del Código Eléctrico Nacional (NEC) o los códigos o normas locales o
estatales aplicables, relacionados con los requerimientos eléctricos para las instalaciones de agricultura.
ESTE ARTEFACTO NO CUMPLE CON LOS REQUISITOS DEL ARTÍCULO 500 DEL NATIONAL ELECTRICAL CODE (Código Eléc-
trico Nacional) 2008. Este ventilador no es adecuado para uso en lugares peligrosos. Consulte el Artículo 500 del Código Eléctrico
Nacional (NEC) o LOS CÓDIGOS O NORMAS LOCALES O ESTATALES APLICABLES, RELACIONADOS CON LOS REQUERIMIENTOS
ELÉCTRICOS PARA LOS SITIOS PELIGROSOS.
AVISO: Este equipo p3-ha sido probado y cumple con los límites para aparatos digitales Clase B, conforme a la Parte 15 de las Normas
de la FCC. Estos límites están diseñados para brindar protección razonable contra la interferencia perjudicial en una instalación resi-
dencial. Este equipo genera, utiliza y puede irradiar energía de frecuencias de radio y, si no se instala y utiliza de conformidad con las
instrucciones, puede causar interferencia perjudicial a las comunicaciones de radio. Sin embargo, no hay garantía de que la
interferencia no ocurra en una instalación en particular. Si este equipo no causa interferencia perjudicial a la recepción de radio o
televisión, lo cual se puede determinar al encender y apagar el equipo, el usuario puede intentar corregir la interferencia con una
o más de las siguientes medidas: Reorientar o reubicar la antena receptora. Aumentar la separación entre el equipo y el receptor.
Conectar el equipo en un tomacorriente de un circuito diferente a donde está conectado el receptor. Pedir ayuda al distribuidor o a
un técnico experimentado de televisión y radio. Se informa al usuario que los cambios y las modificaciones realizadas al equipo sin la
PARA REDUCIR EL RIESGO DE INCENDIOS, DESCARGAS ELÉCTRICAS SIEMPRE SIGA LAS
SIGUIENTES INSTRUCCIONES Y ADVERTENCIAS:
PRECAUCIÓN


Product specificaties

Merk: Lasko
Categorie: Ventilator
Model: Twist-Top T12110

Heb je hulp nodig?

Als je hulp nodig hebt met Lasko Twist-Top T12110 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Ventilator Lasko

Handleiding Ventilator

Nieuwste handleidingen voor Ventilator