Lancom XS-5116 Handleiding

Bekijk gratis de handleiding van Lancom XS-5116 (1 pagina’s), behorend tot de categorie Schakelaar. Deze gids werd als nuttig beoordeeld door 46 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over Lancom XS-5116 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

TECHNICAL DATA

Hardware

Power supplySwappable power supply unit (110–230 V, 50–60 Hz)

Power consumptionmax. 250 watts

EnvironmentTemperature range 0–40°C, humidity 10–90%; non-condensing

HousingRobust metal housing, 19“ 1U (442 x 44 x 375 mm > W x H x D),

network connectors on the front

Number of fans1

Interfaces

QSFP+2 * QSFP+ 40 Gbps uplink ports for connection to higher-level core switches or content

servers, also congurable as stacking ports via software

SFP+ / TP-Ethernet

Combo-Ports

Each 2 * SFP+ (1 / 10 Gbps) / TP-Ethernet (1 / 2,5 / 5 / 10 Gbps) combo ports for use as

additional downlink ports or for connection to a NAS or router

SFP+12 * SFP+ 1 / 10 Gbps downlink ports for aggregation of subordinate access switches

Console1 * RJ-45 / 1 * Micro USB

USB1 * USB

Declaration of Conformity

Hereby, LANCOM Systems GmbH |Adenauerstrasse 20/B2 |D-52146 Wuerselen, declares that this device is in com-

pliance with Directives 2014/30/EU and 2014/35/EU. The full text of the EU declaration of conformity is available at the

following internet address: www.lancom-systems.com/ce/

Package Content

DocumentationQuick Reference Guide (DE/EN), Installation Guide (DE/EN)

Mounting brackets2 mounting brackets for rack mounting

Power supply1x exchangeable power supply (expandable to 2 exchangeable power supplies for redundancy

operation)

Cables1 IEC power cord, 1 serial conguration cable, 1 micro USB conguration cable

MOUNTING AND CONNECTING THE DEVICE

c SFP+ ports 1G / 10 G

OffPort inactive or disabled

GreenLink 10 Gbps

Green, blinkingData transfer, link 10 Gbps

OrangeLink 1 Gbps

Orange, blinkingData transfer, link 1 Gbps

a

b

Conguration interfaces RJ-45 & micro USB (Console)

Connect the conguration interface a via the included serial

conguration cable to the serial interface of the device you want

to use for conguring / monitoring the switch. Alternatively use the

interface with a suitable micro USB cable.b

c

USB interface

Connect a USB stick to the USB interface to store general

conguration scripts or debug data.

You can also use this interface to upload a new rmware.

d

SFP+ interfaces 1G/10G

Insert suitable LANCOM SFP modules into the SFP+ interfaces 1

to 12. Choose cables which are compatible with the SFP modules

and connect them as described in the SFP modules mounting

instructions www.lancom-systems.com/SFP-module-MI.

e

SFP+ interfaces 1G/10G (combo ports)

Insert suitable LANCOM SFP modules into the SFP+ interfaces 13

to 14. Choose cables which are compatible with the SFP modules

and connect them as described in the SFP modules mounting

instructions www.lancom-systems.com/SFP-module-MI.

f

TP Ethernet interfaces 1G/2.5G/5G/10G (combo ports)

Connect the interfaces 13 to 14 via Ethernet cables to your PC or a

LAN switch.

g

QSFP+ interfaces 40G

Plug suitable LANCOM QSFP+ modules into the QSFP+

interfaces 15 to 16. Select cables suitable for the QSFP+

modules and connect them as described in the SFP modules

mounting instructions

www.lancom-systems.com/SFP-module-MI.

2 slots for power supply modules with mains connection

socket (rear panel)

To install a power supply module, remove the appropriate

module slot cover by loosening both associated screws and

insert the power supply module.

Supply the device with voltage via the power supply module

mains connector. Use the supplied power cord (not for WW

devices) or a country -specic LANCOM power cord.

To remove a power supply module, disconnect the device from

the power supply and pull the power plug out of the module.

Then push the release lever to the left. Now you can pull I

the module out of the device by the handle .J

LANCOM XS-5116QF

Quick Reference Guide

Cudeadylo-r

4

bReset button

~5 sec. pressedDevice restart

7~12 sec. pressedConguration reset and device restart

a

bc

a System / Fan / Stack

System: greenDevice operational

System: redHardware error

Fan: redFan error

Stack: offNo connection

Stack: greenAs master device: port activated and

connected to slave device

Stack: orangeAs slave device: port activated and con-

nected to master device

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document

contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111946/0720

e TP Ethernet ports 1G / 2.5G / 5G / 10G (combo ports)

OffPort inactive or disabed

GreenLink 10 / 5 / 2.5 Gbps

Green, blinkingData transfer, link 10 / 5 / 2.5 Gbps

OrangeLink < 2.5 Gbps

Orange, blinkingData transfer, link < 2.5 Gbps

f QSFP+ ports 40G

OffPort inactive or disabled

GreenLink 40 Gbps

Gren, blinkingData transfer, link 40 Gbps

d SFP+ ports 1G / 10G (combo ports)

OffPort inactive or disabled

GreenLink 10 Gbps

Green, blinkingData transfer, link 10 Gbps

OrangeLink 1 Gbps

Orange, blinkingData transfer, link 1 Gbps

d

c

a

b

fe

deg

Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

ADo not rest any objects on top of the device and do not stack multiple devices.

AKeep the ventilation slots of the device clear of obstruction.

AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

g Power supply unit LED

OffNo primary voltage supply

GreenSecondary voltage supply OK

OrangeCritical power supply event that causes a

shutdown: OCP, OVP, fan failure

In case of parallel primary voltage supply

by second power supply unit: power cable

disconnected or power failure

Orange, blinkingPower supply warning event in which the

power supply continues to operate: high

temperature, high power, high current

consumption, slow fan

g

f

I

J

Product specificaties