La Crosse Technology 616-146V2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 616-146V2 (8 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Model: -146 www.lacrossetechnology.com/support 616 v2 Page | 1
Model: -146 616 v2
Quick Setup Guide
DC: 090116
Atomic Projection Alarm
with Indoor and Outdoor Temperature
Snooze/Backlight
BUTTONS
TX141v2
Outdoor
Sensor
Time, Alarm
with Snooze,
& Calendar
Indoor/Outdoor
Temperature +
Trends
Projection
Arm
Rotates 180°
2 “AAA
Batteries
2 “AA
Batteries
USB Charge
Port, 1 Amp
Model: -146 www.lacrossetechnology.com/support 616 v2 Page | 2
GET STARTED
Step 1:Insert included 5-volt AC power adapter into projection the
Alarm then into wall outlet. and
Step 2:Insert 2 AAA batteries (not included) into the projection new“ ”
alarm. Observe the correct polarity.
Step 3:Insert 2 batteries (not included) into the TX141v new AA2
sensor. Observe the correct polarity. The red LED will ash
when transmitting.
Step 4: After 5 minutes place the sensor outside in a shaded location.
Note: If the outdoor temperature is not displayed after 3 minutes, hold
the +/TEMP button to search for outdoor sensor. Then, press the
TX button on the sensor to send signal.
SET TIME AND DATE
1. Hold the button to enter time set mode. SET/°F/°C
2. Use or buttons to adjust values the +/TEMP -/TIME .
Press and hold for fast adjustment.
3. Press button to confirm adjustments and move to the SET/°F/°C
the next item.
Time and Date setting order:
1. WWVB(ON/OFF)
2. Time Zone
3. DST Daylight Saving Time (ON/OFF)
4. 12/24 Hour Time Format
5. Hour
6. Minutes
7. Year
8. Month
9. Date
Note: Day of the week sets automatically.
Press button to exit or wait 20 seconds without the SET/°F/°C ,
pressing buttons to return to the normal time display.
FAHRENHEIT/CELSIUS
Press button to select Fahrenheit or Celsius the SET/°F/°C
temperature display.
Model: -146 www.lacrossetechnology.com/support 616 v2 Page | 3
SET TIME ALARM
1. button Hold the ALARM to enter alarm time set mode.
2. Use or buttons to adjust values. the +/TEMP -/TIME
3. Press button to confirm adjustments and move to the the ALARM
next item.
Alarm Time setting order:
1. Hours
2. Minutes
ACTIVATE/DEACTIVATE TIME ALARM
Press button once to view alarm time. the ALARM
Press button again to activate the alarm. the ALARM
Bell icon appear s.
Press button again to deactivate the alarm. the ALARM
The bell icon disappears.
SNOOZE (Silences alarm temporarily)
Press button to silence alarm for 9 minutes. the SNOOZE/LIGHT
will show. Zz
When in snooze mode, press to stop alarm for one day. ALARM
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut o completely.
BACKLIGHT AND PROJECTION INTENSITY
Press and release the button to adjust the SNOOZE/LIGHT
brightness of the backlight and projection image (together):
High
Low
OFF
Note: When the Adapter is NOT in use, the High/Low/On/O features
are not available.
PROJECTION (On/Off, rotate, projection mode)
Battery Power: SNOOZE/LIGHTPress and release the button to
show the projection for 10 seconds.
A/C Power: Projection is displayed constantly unless turned o.
Note: Projection will not display constantly when operating on battery
power.
Alarm
Bell Icon


Product specificaties

Merk: La Crosse Technology
Categorie: Wekkerradio
Model: 616-146V2

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology 616-146V2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wekkerradio La Crosse Technology

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio