La Crosse Technology 616-143V3 Handleiding

Bekijk gratis de handleiding van La Crosse Technology 616-143V3 (2 pagina’s), behorend tot de categorie Daru. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over La Crosse Technology 616-143V3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Page 3Page 4Page 2

Atomic Projection Alarm

with Indoor & Outdoor Temperature

QUICK START GUIDE

MODEL: 616143V2 / 616143V3

DC: 082621

Full manual can be found under the Support tab here:bit.ly/616-143v2

POWER UP

1. Insert 2-AA batteries into your Outdoor Sensor.

2. Insert the 5 volt power cord into the outlet, then into your

Projection Alarm. Optional: Insert 3-AAA batteries for backup.

3. Set time, date, etc.

4. Once the sensor is reading to your station, place sensor

outside in a shaded location.

Watch sensor mounting video: http://bit.ly/TH_SensorMounting

AA

AA

TX141-Bv3 or

TX141-Bv4

Outdoor Sensor

616-143v2 or

616-143v3

Projection Alarm

ATOMIC TIME SIGNAL (WWVB)

SETTINGS

• The Atomic Time Signal icon (tower) will flash while searching,

and be solid when connected.

• Hold the -/TIME button anytime, to manually search for the

atomic time signal.

• The backlight and USB charging port will momentarily turn o

while the clock searches for the atomic signal.

• For information about WWVB visit: bit.ly/AtomicTime

ADJUSTABLE BACKLIGHT

• Press and release the SNOOZE/LIGHT button to activate the

backlight for 5 seconds.

• The backlight does not remain on constantly.

1. Hold the SET/°F/°C button to enter the Setting Menu.

2. Press the +/TEMP or -/TIME button to adjust and SET/°F/°C to

confirm.

Note: Press one button at a time while in the setting menu.

Settings Menu Order:

• WWVB Atomic Time (ON/OFF)

• Time Zone

• DST Daylight Saving Time (ON/OFF)

• 12/24 Hour Time Format

• Hour

• Minutes

• Year

• Month

• Date

Note: Weekday will set automatically as year,

month and date are set.

• Press the SET/°F/°C button to select between a Fahrenheit or

Celsius temperature display.

FAHRENHEIT / CELSIUS

PROJECTION ON/OFF

• ON/OFF: Projection can be turned ON or OFF by sliding the

PROJECTION ON/OFF button.

PROJECTION ROTATION

PROJECTION ALTERNATES TIME/TEMP

• Press the PROJECTION button to rotate the projection image in

180 degree increments.

• The projection will alternate between Time and Outdoor

Temperature. This is not adjustable.

AAA

AAA

AAA

• Focus: Use the Focus Wheel on the side of the clock to adjust the

projection focus.

PROJECTION FOCUS WHEEL

Focus WheelAlternates: Time & Temperature

OUT ˚F

Product specificaties