Kramer MTX3-44-HSA Handleiding
Pagina's 3 Niet gecategoriseerd
Bekijk de handleiding van Kramer MTX3-44-HSA gratis online of download de PDF. 15 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
MTX3--44HSA Quick Start
Manufacturer
: Kramer Israel
2
Negev St. Airport City7019900
+972 (0)73
-- 2650200
EU Importer:
Kramer EMEA Netherlands
Stroombaan 16
, The Garden 1181VX
Amstelveen
info_EMEA@kramerav.com
P/N:
2900-301900QS
Rev:
2
Scan for full manual
MTX3-- Start 44HSAQuick Guide
This guide helps you install and use your MTX3-44-HSA for the first time.
Go to www.kramerav.com/downloads/MTX344--HSA to downloadthe latest user manual and check if
firmware upgrades are available.
Step 1: Check what’s in the box
MTX3--44HSA 4x4 4K60 4:4:4 HDMI+Audio Seamless Matrix Switcher
1 Quick start guide
Mounting Bracket
Power cord(s) and adaptor
4 Rubber feet
Step 2: -Get to know yourMTX344-HSA
#
Feature
Function
1
OUT A-D
(SELECTOR) Buttons
Press to select an output, then press the input you want to (or ALL/OFF)route to it .
2
INFO
OUTA & OUTB
Buttons
Press and hold OUTA & OUTB simultaneously to display the machine information.
The OSD INFO screen is displayed on all 4 outputsfor ~10 seconds (), and shows
the input and output resolutions, HDCP status, IP parameters, and the firmware
version.
3
EDID
OUTC & OUTD
Buttons
Press and hold OUTC & OUTD simultaneously to enter EDID Management . Mode
After entering this mode, press an Input button to select the input whose EDID you
want to edit, and then:
•Press an Output button to copy that output’s EDID to the selected input
OR
•Press an Input button to copy the EDID on that input to the selected input
OR
•Press OFF to revert to the factory default EDID
4
IN 1-4
(SELECTOR) Buttons
After selecting an output, press to select the input that will be routed to it.
5
ALL Button
Press to perform an action on all outputs.
For switching, press ALL followed by an IN button to route thselected input to all at
outputs. For example, press ALL and then IN 2 to route input 2 to all the outputs.
6
RESET TO
1080P
ALL & STO ButtonsPress and hold ALL & STO simultaneously to set all outputs to 1080P resolution.
Product specificaties
| Merk: | Kramer |
| Categorie: | Niet gecategoriseerd |
| Model: | MTX3-44-HSA |
Heb je hulp nodig?
Als je hulp nodig hebt met Kramer MTX3-44-HSA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Kramer
Kramer KC-Virtual Brain 1 (Gen2) Handleiding Kramer SWT3-22-HU-WP-T Handleiding Kramer KT-2010-Gen2 Handleiding Kramer SWT3-81-PR Handleiding Kramer MTX3-42-HU Handleiding Kramer FRAME-1GP Handleiding Kramer T-REC5-M-V Handleiding Kramer KRT-4-M-V Handleiding