Kramer MTX3-42-HU Handleiding

Bekijk gratis de handleiding van Kramer MTX3-42-HU (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.0 sterren uit 8 reviews. Heb je een vraag over Kramer MTX3-42-HU of wil je andere gebruikers van dit product iets vragen? Stel een vraag

MTX3-42-HU Quick Start

Manufacturer: Kramer Israel

2 Negev St. Airport City 7019900

+972 (0)73-265-0200

info_il@kramerav.com

EU Importer: Kramer EMEA Netherlands

Stroombaan 16, The Garden 1181VX

Amstelveen

info_EMEA@kramerav.com

P/N: 2900-301894QS1Rev:

Scan to go to website

MTX3-42-HU Quick Start Guide

This guide helps you install and use your MTX3-42-HUfor the first time.

Go to http://www.kramerav.com/downloads/MTX3-42-HUto download the latest user manual and check if

firmware upgrades are available.

Step 1: Check what’s in the box

MTX3-42-HU 4x2 4K60 USB-C/HDMI Matrix 1 Quick start guide 4 Rubber feet

1 Bracket set Power cord(s) and adaptor 1 Multi signal USB-C cable (1m)

Step 2: Get to know your MTX3-42-HU

# Feature Function

1 IN 1 & IN 2 Ports

Connect to a USB-C AV source that supports DisplayPort Alternate Mode. The

connected source can be charged to 100W IN1 and 60W for IN2 via USB Power

Delivery 2.0).

2 USB-C

Charging LEDs (per input port)

While charging the connected USB-C port, the charging icon becomes visible and

lights orange.

3 IN 1, IN 2, IN 3 & IN 4

Status LEDs (per input port)

LED Status Indicates

Lights green The input is selected and connected with the selected USB

host and no AV source is detected

Lights blue An input is selected and connected with the active AV source

Flashes blue The input is selected and has no active AV signal.

Off No input signal is detected.

4 IN 3 & IN 4

Ports

HDMI Connect to an HDMI source.

5

HOST USB B 3.1

Connector

Connect to a USB host (for example, a room PC) to communicate with the USB

devices.

6 INPUT Button Press to select the input routed to the output indicated by the lit OUTPUT LED. Each

press advances to the next input – after IN4, it returns to IN1.

7 OUTPUT Button

Press to select to which output the signal will be routed when the INPUT selection

button is pressed. (Press to toggle between OUT1 and OUT 2).

8 OUTPUT LEDs (1 or 2) LED StatusIndicates

Lights blue Displays the output that will be routed when an input is

selected by pressing the INPUT button.

Product specificaties