Konig SAS-DVRPIR10 Handleiding

Konig Bewakingscamera SAS-DVRPIR10

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig SAS-DVRPIR10 (126 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/126
SAS-DVRPIR10
MANUAL (p. 2)
ANLEITUNG (S. 7)
MODE D’EMPLOI (p. 12)
GEBRUIKSAANWIJZING (p. 17)
MANUALE (p. 22)
MANUAL DE USO (p. 27)
MANUAL (p. 32)
HASZNÁLATI ÚTMUTATÓ (o. 37)
KÄYTTÖOHJE (s. 42)
BRUKSANVISNING (s. 47)
NÁVOD K POUŽITÍ (s. 52)
MANUAL DE UTILIZARE (p. 57)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 62)
BRUGERVEJLEDNING (s. 67)
VEILEDNING (s. 72)
ИНСТРУКЦИЯ (77 стр.)
KILAVUZ (s. 82)
KASUTUSJUHEND (lk. 87)
NÁVOD (s. 92)
ROKASGRĀMATA (lpp. 97)
NAUDOJIMO VADOVAS (102 p.)
PRIRUČNIK (str. 107)
РЪКОВОДСТВО (p. 112)
INSTRUKCJA OBSŁUGI (str. 117)
PRIROČNIK (str. 122)
Motion Detector with Camera
2
ENGLISH
Introduction
The motion detector is ideal for hidden security and observation. In the PIR housing there
is an SD card reader (SD card not included) for recording, integrated with unique motion
detection technology. The recorder is used to constantly record but it will not store data if
there is no movement detected. If movement is detected the recorder will start storing the
data 3 seconds before movement is detected. This technology ensures that no movement is
lost and everything is captured. It is equipped with IR LED for night vision and microphone.
The SAS-DVRPIR10 comes with a remote control for easy operation.
Description
1. LED light
2. Camera
3. IR receiver
4. Mic
5. Standby indicator
6. AV out
7. USB port
8. TF card slot
9. DC plug
1. Power On/O
2. Set
3. Bracket
4. Power indicator
5. Motion detection (trigger)
Settings
1. Connect the motion detector to your notebook, either directly or with a USB connection.
Turn on the power.
3
ENGLISH
2. Open the folder and select DvXSet.exe to enter the settings.
• Date: Click on the year, month and date to set. Use
the up and down arrow button to adjust the settings.
• Time: Click on the hour, minute and second to set.
Use the up and down arrow button to adjust the
settings.
• Stamp Date Format: Select YY/MM/DD, DD/MM/YY
or MM/DD/YY. Use the arrow down button to adjust
the settings.
• Motion Detection Sensitivity: Select the sensitivity of
the motion detector from 1 to 5. Use the arrow down
button to adjust the setting. (5 is the most sensitive
setting, 3 is recommended).
• Light Frequency (Hz): Select the light frequency for
your country. For example, 50Hz for Europe; 60Hz for
United States. Use the arrow down button to select.
• Image Quality: Select the recording quality, High-HD, Standard or Low VGA. Use the arrow
down button to select.
• OverWrite: If the SD card must be overwritten when it is full, then select ON. If overwritten
is not preferred, then select OFF. Use the arrow down button to select.
• Bell: When you want to hear a peep sound, press the button on the remote control or
motion detector, then select ON. If not, then select OFF. Use the arrow down button to
select.
• After adjusting all settings, click on SAVE and then press the SET button on the back side of
the camera for 3 to 5 seconds to store the settings in the motion detector.
Operation
1. Insert a Micro SD Card (max. 32 GB).
2. Insert the power supply into DC plug of the DC cable. Switch the power on. The power
and standby indicator light up.
1. Power indicator 2. Standby indicator


Product specificaties

Merk: Konig
Categorie: Bewakingscamera
Model: SAS-DVRPIR10

Heb je hulp nodig?

Als je hulp nodig hebt met Konig SAS-DVRPIR10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Konig

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera