Konig KN-MICW621 Handleiding

Konig Microfoon KN-MICW621

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig KN-MICW621 (96 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/96
KN-MICW621
MANUAL (p. 2)
ANLEITUNG (S. 7)
MODE D’EMPLOI (p. 12)
GEBRUIKSAANWIJZING (p. 17)
MANUALE (p. 22)
MANUAL DE USO (p. 27)
MANUAL (p. 32)
HASZNÁLATI ÚTMUTATÓ (o. 37)
KÄYTTÖOHJE (s. 42)
BRUKSANVISNING (s. 47)
NÁVOD K POUŽITÍ (s. 52)
MANUAL DE UTILIZARE (p. 57)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 62)
BRUGERVEJLEDNING (s. 67)
VEILEDNING (s. 72)
ИНСТРУКЦИЯ (77 стр.)
KILAVUZ (s. 82)
NÁVOD (s. 87)
INSTRUKCJA OBSŁUGI (str. 92)
Wireless Microphone System
2
ENGLISH
Introduction
Wireless microphone system with two microphones and an information display. The system
is equipped with a special voice limiter compressor to avoid distortion caused by high sound
peaks. Use 8 systems in one room without problems whereas regular systems with only 1
channel interfere.
Description receiver
1. POWER: On/o฀ button
2. SELECT: switch between receiver A and B for the use of buttons 3, 4 or 5
3. SET: button for function set, tune or pre-programmed channels
4. UP: button for tuning up or channel selection up of pre-programmed channels
5. DOWN: button for tuning down or channel selection down of pre-programmed channels
6. DISPLAY: separate for receiver A and B
7. VOLUME CONTROL: separate for receiver A and B
8. ANTENNA: separate antenna for receiver A and B
9. ANTENNA CONNECTOR: for connection of antenna A and B
10. UNBALANCED AUDIO OUTPUT: 6.35฀mm output for mixed signal (A+B) or separate signal
of receiver A and B
11. BALANCED AUDIO OUTPUT: separate XLR outputs for channel A & B
3
ENGLISH
Description LCD display receiver
•฀ RF: Shows the strength of the received microphone signal
•฀ AF: Shows the microphone’s audio signal level
•฀ CH01: Selected pre-programmed channel
•฀ A ANT: The antenna which receives the signal of the microphone (A for receiver A and B
for receiver B)
•฀ 864.40: Frequency of the selected pre-programmed channel
•฀ OPEN: Shows which receiver (display) is selected for the use of function buttons 2–5
•฀ AUTO: Shows that the microphone is powered o฀. Appears also when there is no
connection with the microphone on the showed frequency in the display
•฀ MUTE: There is no audio output from the receiver to mixer or ampli฀er because the
microphone is powered o฀ or there is no reception
•฀ TUNE: Push the SELECT button (2) to switch between manual tuning or pre-programmed
channels. With manual tuning it’s possible to select the frequency by steps of
0.05฀MHz. The range is 840.00฀MHz till 868.00฀MHz. This feature o฀ers the use of
other wireless microphones operating in the frequency band from 840.00฀MHz
till 868.00฀MHz. Note: the supplied microphones are pre-programmed from
863.00฀MHz till 865.00฀MHz
IMPORTANT NOTICE: It’s the responsibility of the user to ensure that the use of frequencies
comply with the local regulations and does not cause interference with other users.


Product specificaties

Merk: Konig
Categorie: Microfoon
Model: KN-MICW621

Heb je hulp nodig?

Als je hulp nodig hebt met Konig KN-MICW621 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Konig

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon