Konig KN-CP40 Handleiding

Konig Kompas KN-CP40

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig KN-CP40 (42 pagina's) in de categorie Kompas. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/42

MODE D'EMPLOI (p. 7)

Boussole numérique

MANUAL (p. 2)

Digital Compass

MANUALE (p. 13)

Bussola digitale

HASZNÁLATI ÚTMUTATÓ (o. 19.)

Digitális tájoló

MANUAL DE UTILIZARE (p. 30)

Busolă digitală

BRUGERVEJLEDNING (p. 36)

Digitalt kompas

BRUKSANVISNING (s. 25)

Digital kompass

NÁVOD K POUŽITÍ (s. 27)

Digitální kompas

GEBRUIKSAANWIJZING (p. 10)

Digitaal Kompas

ANLEITUNG (s. 4)

Digitalkompass

MANUAL DE USO (p. 16)

Brújula Digital

KÄYTTÖOHJE (s. 22)

Digitaalinen kompassi

ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 33)

Ψηφιακή Πυξίδα

VEILEDNING (σελ. 39)

Digitalt kompa

KN-CP40

ENGLISH

1. Features:

1. Four buttons: SET, COMPASS,

HISTORY, ALTI

2. Hour, minute, second display

3. 12/24 hour selectable

4. °C/°F selectable

5. Weather forecast for 4 states:

sunny, semi-sunny, cloudy, rainy

6. Indoor temperature range

(-10°C~50°C), sampling cycle:

30 seconds

7. Compass function

8. Altimeter function

9. Height unit: M/Feet selectable

10. Air pressure history record

11. Air pressure unit: hpa/mmHg/

inHg selectable

2. Power-On And Reset

When Power-On or reset, LCD full display for 3 seconds 

LED light on

for 3 seconds 

Normal mode

3. Button Function:

Function

Operation

SET HIST COMPASS ALTI

Standard

mode

Press Check date Check history

record

Enter

compass

mode

Altitude height

mode

Hold Enter setting

mode

―Enter

checkout

mode

Test absolute

height

Set mode Press Conrm

setting

Exit setting

mode

One step

forward

One step

forward

Hold 8 steps/―

seconds

forward

8 steps/

seconds

forward

3.1. Normal Mode Set

1. Press “SET” to toggle between time and date.

2. Hold “SET” for 2 seconds to enter setting mode.

3. Hold “SET” for 12 seconds to power off, press any button to power on.

4. When displaying altitude, press “HIST” to check height history record.

5. When displaying barometer, press “HIST” to check air pressure history

record.

6. Press “COMPASS” to enter compass mode.

7. Hold “COMPASS” to enter compass checkout mode.

8. Press “ALTI” to switch display altitude height.

9. Hold “ALTI” to test absolute height.

10. While holding “SET”, again hold “COMPASS” to enter magnetism

deflection angle setting.

11. LED light will come on if any button is pushed.

3.2. Setting Mode

1. In normal mode press “SET” for 2 seconds to enter setting mode.

2. There will be 1 Hz flashing during setting.

3. The sequence of settings: 12/24  hour  minute  year  month 

date

 °C/°F  HPA/mmHg/inHg 

M/FEET.

4. Press “SET” to confirm the settings.

5. Press “ALTI” once, the setting will go ahead one step; hold the key for

2 seconds, it will run forward by 8 steps/seconds.

6. Press “COMPASS” once, the setting will go back one step; hold for

2 seconds, it will run back by 8 steps/seconds.

7. The system will exit automatically if no key is pressed for 15 seconds,

the set value will be stored.

3.3. Display Mode

1. When displaying the date, if no key is pressed for 15 seconds, it will

exit to time mode.

2. When displaying compass, it will exit automatically if no key is pressed

for 30 seconds.

3. When checking history record, it will exit automatically if no key is

impressed for 15 seconds.

3.4. Compass Mode

1. Press “COMPASS” to enter compass mode.

2. Hold “COMPASS” to enter checkout mode, at this moment place the

product horizontally, then turn it a full circle, finish the checkout, press

“COMPASS” again to exit the check out mode and enter into compass

mode, start testing direction (please follow the steps above strictly to

get correct results).

3. While holding “SET”, again hold “COMPASS” to enter into magnetism

deflection angle setting (range:+/- 90 degree), press “HIST” to exit after

finishing the settings or the menu will exit automatically after

15 seconds.

4. Make sure to keep the compass away from magnetic fields during use.

In order to enhance the accuracy, please repeat the steps of checkout

mode when changing the environment or replacing the batteries.

3.5. Altitude Mode

1. Press “ALTI” to enter testing altitude height mode (abs), in this mode

the height is measured and the display is refreshed every 5 seconds.

2. In normal mode, hold “ALTI” to enter test relative height mode (rel.),

the height will be cleared, and start testing the height from ZERO to

destination.

3. Height measure range: - 1000 feet~30000 feet (-305m~9144m),

beyond this range it will display “Err”.

3.6. Barometer Mode

1. This mode in also under normal mode, the air pressure value is

displayed for current condition, air pressure being measured every

30 seconds and the display refreshed.

2. While holding “SET”, again hold “ALTI” to enter air pressure value

correct mode.

3. Barometer measuring range: 301 hpa~1051 hpa, beyond this range it

will display “Err”.

Product specificaties

Merk:	Konig
Categorie:	Kompas
Model:	KN-CP40
Kleur van het product:	Zwart, zilver
Soort:	Digital navigational compass
Materiaal behuizing:	Kunststof
Agenda:	Ja
Klok functie:	Nee
Thermometer:	Ja