Celestron TrekGuide Handleiding

Celestron Kompas TrekGuide

Lees hieronder de 📖 handleiding in het Nederlandse voor Celestron TrekGuide (20 pagina's) in de categorie Kompas. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

ENGL ISH 1I

LCD DIspLay & But tons anD Batte ry

Compartment

1. B button Barometer setting mode/decrease /▼

values

2. A button/▲ Altitude setting mode increase

values

3. T/ MODE Toggle display between button time,

date, year, and alarm:

Mode used in various settings

4. C button Compass setting mode and exit any

setting mode

5. button Turn on the backlight/Lock/Unlock

keys; Level in center

6. BATTERY Located in the back of the unit

COMPARTMENT

InstructIon Manual

Model #48006

For a more detailed instruction manual, visit the

Celestron website at www.celestron.com.

button

2 I EN GLI SH

Set Up

• 2 PCS CR2032 lithium batteries are included. When battery

is low, the battery low icon ( )

will be on. Use a small screwdriver to remove the screws

of the battery cover, remove the batteries with a thin knife

or screwdriver, place the positive(+) side of the batteries

upward, and then replace the screws.

Main F Unction S an d ope ration S

• Press the MODE key to switch mode between Clock, Date,

Year and Alarm Clock.

• Press A/▲ ▼, B/ , C buttons to switch between:

ALTIMETER/BAROMETER/COMPASS MODES.

tiMe Setti ng

• Press and hold “MODE” key for 3 seconds to enter settings.

Press“▼”or “▲” to change setting, and press “MODE” button

to conﬁrm and move to next setting.

• Setting sequence is as follows: 12/24 hour format, Hour,

Minute, Second, Year,

Month/Day sequence, Month, Day, Temperature unit,

Air Pressure unit, and Altitude unit.

• If no button is pressed for 15 seconds, the display will return

to previous mode.

• Press “C” button to exit the Time Setting Mode.

LCD DIspLay

1. Cardinal point when the compass in the north direction

2. Direction arrow

3. Temperature appears when not in compass mode

4. Low battery indicator

5. Appears when in Altimeter (Altitude) mode

6. Indicates maximum altitude

7. Display format of Day and Month

8. AM/PM

9. Year

10. Keypad is locked

11. Appears when sea level pressure is shown 12. Appears when in Barometer pressure mode

13. Units of air pressure

14. Units of altitude appear in altitude mode

ENGL ISH 3I

alarM Setting

• Press “T” button to navigate to Alarm Time Display (“AL”

icon displays on the LCD) Hold “T” button for 3 seconds to

enter alarm clock setting mode. Press “ ”or “ ”to change ▼ ▲

setting, and press “T” button to conﬁrm and move to next

setting.

• The setting sequence is: Hour, Minute and Alarm ON / OFF.

• When the alarm is on, the symbol “ ” appears and when it

is off the symbol “ ” disappears.

• When alarm goes off “ ” will ﬂash, press any button to

stop the alarm and if no button is pressed for 15 seconds

the alarm will automatically stop after 2 minutes.

ALTIMETER AND BAROMETER

When batteries are inserted, the device will automatically

measure the barometer readings as well as the maximum

sea level pressure reading.

Set and reSet altiMeter (For altitUde)

Altimeter measures in either meters

or feet.

• Press “A” button to enter altimeter mode. Press “A” button

again to display the maximum altitude.

• When LCD displays current altitude, press and hold “A”

button for 3 seconds to enter setting. Press “ ” “▼or ▲”tto

adjust altitude, and press “MODE” button to conﬁrm. Press

“▼” “▲” and at the same time, current altitude value will be

reset to 0.

• When LCD displays maximum altitude, press “▼”and “▲” at

t he same time and the maximum will be cleared and reset

to 0.

Set and reSet Sea level preSSUre and

Weather Foreca St iconS

• Press “B” button to enter Barometer mode. The LCD will

display the current barometric pressure and press the “B”

button again to display the sea level pressure.

• In the Sea Level pressure display, hold the “B” button down

for 3 seconds to enter the setting.

Press “ ”or “▼ ▲”to change the setting and press “MODE”

button to conﬁrm and move to next setting.

• The setting sequence is as: sea level pressure, toggle

weather forecast icons.

• The weather forecast will start the rst forecast 6 hours

later after the current weather status is entered.

Note: Barometric pressure and sea level pressure

measurement in mbar/hPa, mmHG or inHG. When sea level

pressure is changed, the altitude will adjust itself.

Product specificaties

Merk:	Celestron
Categorie:	Kompas
Model:	TrekGuide
Kleur van het product:	Zwart
Gewicht:	70 g
Breedte:	54 mm
Diepte:	15 mm
Hoogte:	103 mm
Soort:	Elektronisch kompas voor navigatiedoeleinden
Materiaal behuizing:	Kunststof
Agenda:	Ja
Ondersteund aantal accu's/batterijen:	2
Barometer:	Ja
Hoogtemeter:	Ja
Klok functie:	Ja
Thermometer:	Ja
Halskoord:	Ja
Draagriem:	Ja
Productontwerp:	Handkompas
Batterijen inbegrepen:	Ja
Type batterij:	CR2032