Kohler Hauksbee K-32287 Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van Kohler Hauksbee K-32287 gratis online of download de PDF. Deze handleiding is 3 keer bekeken. Vraag over dit model? Stel een vraag
Installation Guide
SKU#32286,32287,32288
USA/Canada: 1-800-4 KOHLER 1446239_8_A
www.kohler.com
PREPARATION
1.Record your model number for future reference.
2.DANGER: Risk of electric shock. To avoid electric shock, the power must be turned off at the circuit breaker or fuse box before
beginning the installation procedure.
3.DANGER: Risk of electric shock. To avoid electric shock, the outlet box must be properly grounded.
4.Important Information. Inspect the product for any damage. This product is for indoor use only. Observe all local codes.
Please see next page for a larger installation image
TOOLS AND MATERIALS NEEDED
FIXTURE INSTALLATION
1.Remove the fixture and parts bag(s) from the carton. Put them onto a clean
and soft cloth to protect finish. Confirm all parts are included.
2.Attach template (S) onto outlet box with screws (D) and mark all anchor hole
positions on the wall. Drill anchor holes in dia. 1/4” for concrete wall or Dia.
3/8” for dry wall. Then take off the template (S).See diagram 1.
3.Loosen screws (G) and then remove mounting plate (B) from canopy (F). Loosen
set screws (H), remove mounting plate (K) from small canopy (I). Repeat for the
other canopy.
4.Insert anchors (L) or (L1) into wall (L for concrete, L1 for dry wall). Attach both
mounting plates (K) onto the wall with screws (J). Attach mounting plate (B)
onto outlet box with screws (D). Ensure ground screw (C) is attached to
mounting plate (B).
5.For Fixture 32288, lift fixture and lace safety cord (R) around mounting plate
(B), then secure it with the safety cord lock.
6.NOTICE: To avoid short circuit, make sure wires are not exposed.Fasten fixture
green or bare ground wire to the green or bare copper wire in outlet box with
wire nut (A) or fasten onto ground screw (C) on mounting plate.
7.NOTICE: To avoid short circuit, make sure wires are not exposed.Fasten fixture
white wire to the white wire in outlet box with wire nut (A). Wrap the wire
connector with electrical tape so that the tape seals the end of wire nut (A),
see diagram 2.
8.NOTICE:To avoid short circuit, make sure wires are not exposed.Fasten the
fixture black wire to the black wire in outlet box with wire nut (A). Wrap the
wire connector with electrical tape so that the tape seals the end of wire nut
(A), see diagram 2.
9.Insert quick connector (E) into the opposing quick connector end.
10.Tuck wires carefully inside outlet box. Attach canopy (F) to mounting plate (B) with
screws (G). Attach small canopy (I) onto mounting plate (K) with set screws (H).
11.Place decorative ring (P) over the shade (O). Then set decorative ring (P) on the
lip of shade (O).
12.Remove socket ring (Q) from socket (N) then install metal shade (O) to central
base (M) with socket ring (Q).
13.NOTICE: Do not exceed recommended wattage. Rated Max 100 W, Type
A/B/C/G. (Bulb(s) not included).
14.Install bulb to the socket (N).
15.Repeat steps 11-14 for all shades.
16.
Restore power to circuit at breaker or fuse box.
CLEANING: Please clean fixture with a soft and dry cloth ONLY. Clean glass with a mild soap.
Approved fastener
(
Wire nut
)
Electrical ta
p
e
Phillips &
Flathead Screwdriver
Wire
Cutter/stripper
Electrical Current
Tester
Electrical
Tape
Diagram 2
Allen
Wrench
Electric
hand drill
Diagram 1
Product specificaties
| Merk: | Kohler |
| Categorie: | Niet gecategoriseerd |
| Model: | Hauksbee K-32287 |
Heb je hulp nodig?
Als je hulp nodig hebt met Kohler Hauksbee K-32287 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden