Kohler Confidante K-3556 Handleiding

Bekijk gratis de handleiding van Kohler Confidante K-3556 (8 pagina’s), behorend tot de categorie Toilet. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 6 reviews. Heb je een vraag over Kohler Confidante K-3556 of wil je andere gebruikers van dit product iets vragen? Stel een vraag





114834-2-BA (-)

Made in Mexico

CONFIDANTE

VITREOUS CHINA

SIPHON WASH TOILET

BEFORE YOU BEGIN

HOW TO USE THESE INSTRUCTIONS

Please read these instructions carefully to familiarize

yourself with the required tools, materials, and installation

sequences. Follow the sections that pertain to your partic-

ular installation. This will help you avoid costly mistakes.

In addition to proper installation, read all operating and

safety instructions.

All information in these instructions is based upon the lat-

est product information available at the time of publica-

tion. The manufacturer reserves the right to make

changes in product characteristics, packaging, or avail-

ability at any time without notice.

These instructions contain important care, cleaning, and

warranty information – please leave instructions for the

consumer.

ORDERING INFORMATION

Confidante Toilet (elongated)K-3556. . . . . . . . . . . . . . .

Confidante Toilet (round front)K-3557. . . . . . . . . . . . . .

NOTES

Observe all local plumbing and building codes.

Shut off the water supply.

Seat post holes are on 5-1/2” centers.

2” passageway.

Water depth from the rim is 6”.

Ensure that the new toilet has the correct

roughing-in dimension. The K-3556 and K-3557

have a 12” roughing-in dimension. See Fig. #1.

Be very careful while working with vitreous china

products. Vitreous china can break or chip if the

bolts and nuts are overtightened, or if carelessly

handled.

Carefully inspect the new fixture for any sign of

damage.

For new construction, refer to the dimensions in

Fig. #1 and Fig. #4 for locating the shut-off valve.

Fixture dimensions are nominal and conform to

tolerances established by ASME Standard

(A112.19.2M).

WARNING:Risk of external leakage. The fill

valve nut has been factory-tightened to design

specifications. If re-tightening is required, wrench

tighten one turn past finger tight.

TOOLS AND MATERIALS REQUIRED

10” adjustable wrench

Metal file (file cut)

Tape measure

Tubing cutter

Level

Hacksaw

Putty knife

Screwdriver

Toilet gasket (wax seal)

Toilet T-bolts (2), 5/16” diameter

Toilet supply shut-off valve, 3/8” recommended

NOTICE:If the existing toilet does not have a supply

shut-off valve below the tank, install one before installing

the new toilet.

Product specificaties