KMA Machines Fuzzly Bear 2 Handleiding

KMA Machines Niet gecategoriseerd Fuzzly Bear 2

Lees hieronder de 📖 handleiding in het Nederlandse voor KMA Machines Fuzzly Bear 2 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick Start Guide

Made in Berlin, Germany since 2013

Please follow us on social: @kmamachines

E-mail: hello@kma-machines.com | Website: www.kma-machines.com

Quick Start Guide

Thank you for purchasing this FUZZLY BEAR 2 Sub Octave Generator.

We hope you get many years of pleasure and use from this device and

if this is your rst product from our brand, welcome!

This simple connecting guide should help start you on your journey to

sonic creativity. However, if you wish to know all of the pedal’s hidden

secrets, you can nd more info on the product page at:

kma-machines.com

Some quick usage examples:

Do you crave that sludgy, chunky FuzzTortion sound? Set the GAIN

control to 3 o’clock and adjust the Bias (SKIN/MEAT) control to noon,

then dial in the VOL to taste. For increasingly more compressed and

gated Fuzz tones, increase the BIAS control further towards the MEAT

or give the FUZZLY BEAR 2 an even thicker coat of fur, by turning the

GAIN further up, allowing the magic to happen when it is set fully

clockwise.

On the other hand, if synthy sputtery Fuzz is what you desire, the

FUZZLY BEAR 2 also has you covered. When the GAIN is set to max

and the Bias set fully to MEAT, it will rip your face off and you’ll get

almost a ghost octave, pseudo trumpety kinda vibe, perfect for the

classic tunes of yesteryear. Decrease the Bias setting for more gnarly

aggressiveness.

With its incredible range of tones, the FUZZLY BEAR 2 is also capable of

old school Overdrive sounds. Set the Bias towards SKIN and dial in the

GAIN around noon. If this is too much, instantly clean up the signal by

rolling off the instrument volume.

FUZZLY BEA R 2 QSG V1.02

FUZZLY BEAR 2 Main Specications

• Modern re-imagining of the classic ‘Jordan Boss Tone’ Silicon-Fuzz

• Vintage ‘70s Fuzz sounds

• Tones ranging from sizzling and chunky overdriven tone

to a furry wall of fuzz

• SKIN/MEAT knob - provides control over Bias

• GAIN control - delivers a whole range of different fuzz shapes

• Compact enclosure with top-mounted jacks - will t into any setup

• True Bypass, with silent relay-based soft switching

Power requirements:

9 V DC, centre -, 2.1 mm, 35 mA max. current draw

9 V DC

Input

FOOTSWITCH

Activates the pedal

MAIN INPUT

Connect your instrument or other audio devices

here (Guitar/Bass/Synths etc.)

MAIN OUTPUT

Connect your amplier/next series of pedal(s)

or other audio devices here

VOL

Selects the master output level

GAIN

Selects the amount of gain

BIAS Control

Selects between two distinct voicing styles

or any variations in between

SKIN: sharp, thin and uffy (fully left/CCW)

MEAT: thick and meaty (fully right/CW)

LEDs

Dual LEDs show when the beast is active

Product specificaties

Merk:	KMA Machines
Categorie:	Niet gecategoriseerd
Model:	Fuzzly Bear 2

Heb je hulp nodig?

Als je hulp nodig hebt met KMA Machines Fuzzly Bear 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd KMA Machines

KMA Machines Fuzzly Bear 2 Handleiding

2 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024