Pyle PSIP24X2 Handleiding

Bekijk gratis de handleiding van Pyle PSIP24X2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over Pyle PSIP24X2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

www.PyleUSA.com

PSIP24X2

2 Pcs. Sound Absorbing Wall Panel

Studio Foam

Acoustic Isolation & Dampening Wedge with Stand

What's in the Box:

• 2* Foam (A)

• 2* Stand (B)

• 2* Steel at bar welded with a small round tube (C)

• 2* Steel at bar welded with a big round tube (D)

• 4* Steel at bars (maybe connected with above two bars) (E)

• 16* Bolts( maybe connected with above two bars)(F)

• 1* Allen key (G)

1. Align the at bar (C)(E) and (D)(E) with 4 holes on the foam (A) and use Allen key (G)

and bolts (F) to put them together. Don’t tighten the bolts too much.

2. Open the legs of the stand.

3. Pull away the top tube of the stand and take away the height adjusting knob in

the middle of the stand.

4. Put the at bar welded with big round tube(D) on the stand.

5. Install back the height adjusting knob back on the

stand and install back the top tube.

6. Put the round tube of (C) on the top of the top

tube of the stand and tighten the knob.

7. Adjust the height of the stand or adjust the height

of the foam.

8. Pull down the bottom at bar a little down and

make the foam to be as at as possible then tighten

the knob to keep the foam in tension.

*The foam maybe not at in the rst few hours

because of the packing but it will recover to it’s

shape very soon, so don’t worry.

Product specificaties